The geyser is small. Reviews from experts and buyers about geysers

Water heater flow type Ariston Fast Evo 11B received relatively small physical dimensions. It can easily be installed on the wall of a bathroom or kitchen. The device operates using batteries, so it does not depend on electricity. Thanks to the switches, comfortable operation is possible. The device cannot overheat due to special protection. There is a flame control sensor, and the maximum water heating temperature is 65 degrees. It is worth noting the open combustion chamber. The water heater will fit perfectly into the interior of a modern home.

Pros:

• Simple and intuitive operation of the device.
• Compact model with attractive design.
• Quiet and efficient geyser.

Minuses:

• Doesn't light up fast enough.

1 Ariston Gi7S 11L FFI

A gas water heater is a technique used to heat water in private homes and apartments. For this, it uses natural gas, therefore it is the cheapest (in terms of operation), and therefore a popular device in this category household appliances. When purchasing such devices, buyers are often interested in which geyser is better. To answer this question, you need to know possible options choices and their features, and then decide on your priority parameters.

Types of gas water heaters

Some buyers often confuse gas water heaters with heating boilers. These are different things. The first ones are used for heating water for washing dishes or bathing, and the second - for the purpose of heating the home.

The principle of operation of a geyser is simple - the incoming gas burns and releases heat, which is sent to the heat exchanger, heating it. This assembly is usually made of copper or other materials with high thermal conductivity. And a coil made of the same material is twisted around it to heat up from the temperature of the heat exchanger. Cold water enters the coil and, passing through it, gradually heats up, and then goes to the tap, being already hot at the exit. As for the resulting combustion products, they enter the chimney and leave the room.

Modern geysers are divided into types according to the following criteria:

• by place of production - abroad or in Russia;
• by type of ignition: manual, automatic or semi-automatic;
• by power: low, medium and high;
• by type of control: mechanical or with flame modulation;
• by type of combustion chamber: open or closed;
• by performance: heating hot water from 5 to 25 l per minute;
• by the number of water intake points: one or two.

Thus, there are many flow household speakers, so choose a reliable and quality device entry into the house should be done carefully, taking into account a number of selection criteria.

Column selection criteria

Before purchasing a speaker for a private home or for a Khrushchev building, you need to decide how the equipment will be used. To do this, it is worth considering how many points you need to supply water to, what power is needed, the type of ignition and other factors.

Power

Gas water heaters are distinguished low, medium and high power. In the first case, the devices (from 9 to 20 kW) are designed to heat water for only one point. Columns of the second type (from 20 to 24 kW) make it possible to use two points at once, but for one of them the water pressure will be significantly weaker. While technology with high power(over 25 kW) is capable of supplying hot water with the same intensity to 2 points, or to 3, but with different pressures.

Advice! For studio apartment with one or two residents, a low-power device is sufficient. For a family of 3 people, it is better to choose a medium-power device. If there are several roommates in the house (from 4) or more than one bathroom, then you should pay attention to equipment with high power.

Arson

According to the type of ignition, geysers are divided into manual, semi-automatic (with piezo ignition) or automatic. The first ones are considered obsolete and are practically not produced today. To light them, you need to light the pilot light with a match, and then turn the knob to supply gas and ignite the burner. In semi-automatic dispensers, to ignite the gas supplied to the igniter, you need to press a button to generate a spark, and then open its supply to the burner.

Advice! During the day, the igniter of a semi-automatic water heater can be left unextinguished, which means that to heat the water you only need to open the gas supply to the burner.

Automatic dispensers use batteries for ignition, and the burner ignites when you turn the handle of the hot water tap. Manual and semi-automatic speakers are cheaper, but they need to be hung in a way that allows easy access to the device. In addition, devices with piezo ignition constantly consume small amounts of gas. Automatic gas water heaters operate completely independently, they do not require access, and there is no need for a constant ignition of the igniter.

When choosing a gas water heater, you should pay attention to such an important characteristic as setting the water temperature, which depends on the intensity of the flame and allows you to set and maintain the selected temperature regime. There are three types of adjustment:

• stepped, in which three modes are available: low, medium and high temperature;
• smooth, in which case the regulator gradually switches settings from minimum value to the maximum;
• automatic, in which the device independently determines the temperature thanks to electronic sensors.

Water pressure

In addition to external regulation, the final temperature is also affected by the water pressure. If it goes up or down, the temperature will change. In cases where the burner power does not change, you will need to set the degree of water heating manually, and this causes certain inconvenience.

Advice! When choosing, it is better to choose a column whose burner has modulating power. It independently adapts to changing pressure and maintains the set water temperature.

Depending on the exhaust system and methods for removing combustion products, water heaters are turbocharged or with chimney outlet. The former remove smoke and burnt particles out through a hole in the wall, and the latter into a common chimney. Based on this criterion, everyone determines for themselves the preferred output method, based on the planned location of the column.

Safety

In addition to the criteria listed above, it is worth paying attention to the presence of security sensors. These include:

• combustion and ionization sensors - if the flame goes out, they shut off the gas supply;
• draft sensor - detects its presence, and if there is no draft, or carbon monoxide goes back into the room, then the flow of gas is blocked;
• hydraulic valve - turns off overheated equipment;
• flow sensor - when the tap is opened, it turns on the column, and when closed it performs the opposite action;
• safety valve - is responsible for protecting pipes from ruptures when water pressure increases;
• pressure reduction sensor - in the absence of water or low pressure, this element blocks the start of the column;
• gas supply sensor - stops the operation of the water heater if there is no gas.

Important! Choosing geyser, you need to make sure that all the listed sensors are installed in it, otherwise its use is very dangerous for humans.

Quality Rating

When purchasing a geyser for a home or apartment, it is worth studying reviews from experts, which may also be in the form of videos with reviews of models. You can find such information on specialized forums. According to the reliability and quality rating in 2017 and 2018, the best equipment is considered to be produced by Neva, Electrolux, Mora, Zanussi, Vaillant, Bosch, Ariston, which can be purchased in Leroy or in any specialized stores.

Geyser NEVA 4510-M

So, best speakers according to several criteria for three price categories (budget, mid-range and premium) will be given in the table below. The models were reviewed based on the opinions of several experts.

So, in order to buy a high-quality geyser, you first need to decide on the necessary parameters: how many points should the device operate on, what power should it have, what are needed additional functions. The given rating of gas water heaters shows the best models that are popular among buyers in 2017-2018 and have received many positive feedback from the experts. Among them, everyone can choose a device that suits the price and capabilities.

A gas device for heating water has gained popularity in recent decades due to the eternal problems with water supply in small cities and towns. The column, according to experts, is one of the most economical options in such a situation. This article and video will tell you which model sold better in 2016 and received more positive reviews from people.

Advantages of a geyser

It's easy to get used to good things. Today's housewives are reluctant to use cold water for household purposes: it is, of course, more pleasant to wash dishes in warm water, and for hand washing it is advisable to heat the water not in a huge "boil" on gas stove. One of the most economical options for homes where there is no hot water supply is an instantaneous gas water heater. It has earned positive reviews from people with several features:

• It is cheaper to heat water with gas than with electricity;
• Easy to operate and safe;
• No inferior performance storage water heaters– boilers;
• Can simultaneously serve 2-3 water flow points;
• Heats water even if the electricity is turned off.

A gas water heater is more economical than an electric one

Modern ones are not harsh units of the 70s of the last century, which were installed in many Khrushchev buildings. They were manually controlled, lit with matches and “saluted” with water when trying to dilute an overly hot stream. Their today's descendants are more advanced and comfortable, but they also have many individual characteristics. Gas water heaters differ in several ways. You should pay attention to them when purchasing a unit:

1. Power.
2. Ignition type.
3. Burner type.
4. Gas pressure in the gas pipeline.
5. Compatible with water pressure.
6. Type of exhaust of combustion products.

Gas water heater parameters: gas pressure and power

The power of the unit can be in three ranges: 17-19, 22-24 and 28-31 kW. Depending on it, you can provide hot water to two or more points in the house. For example, with the lowest range, you can only wash dishes or take a shower without losing heat, but not both at the same time. To do this, the column must be more powerful. The water pressure in the system plays an important role. In city water supply, according to standards, it should be 4 atmospheres, but in reality it can range from 2.5 to 7 atmospheres. If you have your own well, pressure is created by a pump with a given power. The point is that when high blood pressure water, even a high-power column may not have time to heat it. And a small pressure will not light the burner.

How does a gas water heater work?

The gas pressure in the system is a very important component of the purchase. Gas appliances are gaining popularity. If you and a dozen of your neighbors acquire gas water heaters and/or individual gas heating systems, the system specifically in your house or on your street may no longer meet the standards. The cross-section of the supply pipe simply will not allow creating the necessary pressure. The burners will go out or not operate at full capacity. In this case, it is better to collectively contact the gas service of your locality or region to modernize the system.

Advice. In Russia, according to standards, the gas pressure in the network is 13 mbar (versus 20 in European countries). When purchasing a European-made device, find out which gas pressure scale is applicable for a particular model and whether it has a gas reducer to control pressure stability. If the water heater is not adapted to Russian standards, it will not be able to gain the required power.

Gas water heater parameters: types of burner, its ignition and waste disposal

The burner device is the element that proper operation, is able to save gas, and therefore your money. With a constant output burner, you manually regulate the gas supply. For example, to keep the temperature at the same level when changing water pressure. It’s not very convenient, but the pressure doesn’t change that often. A burner with modulating power will automatically adjust to the pressure and independently maintain the heating temperature at the level you set.

The type of ignition is what has undergone the greatest modernization compared to Soviet speakers. No matches are needed: the burner will light by pressing a button (piezo or semi-automatic ignition) or without your effort by the pressure of the switched on water from the mains or using a battery (automatic).

Geyser with piezo ignition

Automatic dispensers are more economical because they light up only when the tap is opened. After turning off the water, special valves stop the flow of gas and the burner goes out. In “semi-automatic machines” the igniter must be constantly on or the device will not work after turning on the water. The wick, left in standby mode, “winds” the counter a little at a time.

According to the type of combustion products discharge, gas instantaneous water heaters are divided into:

• chimney - a corrugated hose is discharged into an existing ventilation passage or chimney in the house;
• turbocharged - the outlet of the burnt gas makes its way straight to the street, in the wall. This is risky, since it risks freezing the outlet in cold weather, then emissions will enter the home. In addition, you need to regularly drain the remaining water to prevent damage to the heat exchanger.

Selection of manufacturer and model

There are many offers on the market. Most popular in last years the following brands of geysers.

• The German company Vaillant makes units that are unpretentious in operation, but at the same time productive and long-lived. No copper was spared for the heat exchanger, and the body has a beautiful silver color that pleasantly harmonizes with most kitchen sets.
• Junkers from German manufacturer Bosch also have stable demand in the domestic market, since they justify the quality.

Read reviews before purchasing a specific model

• Italian Ariston is a diversified brand. AND gas boilers this brand cannot be called the “stepsons” of the company: they are highly effective and multifunctional. The components and parts in these speakers are made of composite material for corrosion resistance and increased service life.
• Geysers from the Swedish company Electrolux have characteristic feature– a relatively small number of nozzles. This makes the device operate quietly.
• Termaxi instantaneous water heaters come from China, but the quality has received many positive reviews. They are usually powerful.
• Columns Italian made Berettas are also in demand. Among other things, because of the appearance.

Attention! When choosing a model, pay attention to its safety. Modern geysers use consumer protection methods. These include combustion, overheating, flow, low water pressure sensors, safety valve, temperature, traction and ionization sensors.

Gas instantaneous water heater: video

Gas water heater: photo

• We offer to buy Gas instantaneous water heaters (gas water heaters) with delivery in the Tavago online store.
• Price for Gas instantaneous water heaters (gas water heaters) from 4235 rubles.
• Read instructions and reviews about Gas instantaneous water heaters (gas water heaters).

A geyser is a heating device running water using a burner in a built-in heat exchanger. There was a time when the popularity of instantaneous gas water heaters began to decline, and consumers became interested in buying electric water heaters. But inexorable time, the experience of many generations, economic factors and new technologies have put everything in its place. Nowadays, autonomous hot water supply using running water gas appliances is experiencing a renaissance. Modern gas-powered instantaneous water heating equipment is highly energy efficient and reliable. And models with a power of 10 kW and above are already able to provide hot water to several consumption points.

Buying a gas instantaneous water heater is not a problem these days. There are plenty of these devices on the heating market to suit every taste. But there are certain criteria that need to be taken into account for correct selection models. They determine how rational your primary and operating costs will be, as well as the final degree of comfort of hot water use:

• gas pressure in the pipeline
• minimum water pressure supply to the gas water heater
• number of hot water consumption points
• hot water capacity in l/min
• geyser power in kW
• burner ignition method
• type gas burner
• type of combustion chamber affecting the connection to the chimney
• overall dimensions and installation conditions
• manufacturer's warranty
• Availability of warranty and post-warranty service

The pressure in the gas pipeline determines both the future heating performance and the possibility of using a particular model, specified in the passport data of the flow gas water heater. No less important for the normal operation of the device is the lower limit of water pressure at the inlet to the gas water heater. Low pressure may cause problems with the operation of the water heater. It should be understood that as the number of floors increases, the water supply pressure decreases, which requires a competent choice of the power of the dispenser. A simple and logical relationship works here - the higher the floor, the lower the pressure in the water supply and less power is needed to heat the water passing through the heat exchanger. Excessive heating power in in this case will simply be a waste of money and will not affect the performance of the device.
According to the method of igniting the burner, geysers are manual, piezoelectric and electronic. It’s even somehow indecent to talk about manual ignition with matches in the 21st century. Piezo ignition is also done manually, albeit by pressing start button fuse. Therefore, it is preferable to choose a device with automatic electronic ignition, which ignites the burner with a spark discharge. This method in the long term provides some savings in gas, which in other options is spent on burning the pilot burner, which burns constantly while the device is operating. The degree of consumer comfort is also influenced by the type of gas burner, the power of which can be changed in steps or with smooth modulation. Pay attention to the type of combustion chamber of the water heater, as this may affect additional costs when installing the device. Geysers with natural draft require a full chimney to remove residual combustion products. And water heating equipment with a closed combustion chamber makes do with the removal of gases to the outside through a thin coaxial pipe.

The common term “gas water heater” means a gas instantaneous water heater - household appliance, providing the preparation of hot water by heating it using a gas burner. This equipment is used in many houses and apartments. Geyser, which is better and which is worse - reviews from customers and specialists presented in our review will help you understand these issues.

Gas water heaters, their types and choice

It can be difficult to choose a geyser for an apartment or private house - this is due to the variety of models, which often do not differ from each other or have minor differences. Consumers are also confused by the opinions of sellers that do not always agree with each other. Some of them praise certain models, others praise competitors' products. As a result, buyers, unable to stop their choice, begin to study reviews of geysers.

Expert reviews can be more useful than any other information, because they are given by those who have already encountered certain models. Let's see what properties the hypothetical most reliable gas water heater should have:

• No breakdowns throughout the entire service life;
• High-quality heat exchanger;
• No leaks;
• Accurate operation of electric ignition;
• Minimal maintenance required;
• Stable operation even with fluctuations in water and gas pressure.

Some geysers have a long service life, while others begin to act up from the first day of operation.

Sometimes it happens that devices from leading brands break down almost every day, while cheap Chinese geysers (for example, some Vektor models) work like a good Swiss watch.

Let's look at the main types of geysers:

• Domestic and foreign consumers tend to choose imported models, often ignoring Russian-made models;
• With electric ignition, piezoelectric ignition and hydrodynamic ignition;
• With flame modulation or simple mechanical control - the former are distinguished by maintaining a stable temperature;
• With open and closed by cameras combustion;
• In terms of performance, geysers are available for sale, providing from 5 to 25 liters of hot water per minute.

When developing geysers, manufacturers use various technological solutions, which affects the reliability of the design. And here one thing is observed small rule– the more expensive the device, the better it is. There are exceptions to the rule, so you should rely on it with caution.

Let's see how to choose the right gas water heater for an apartment or household, and what is best to pay attention to. This information will be presented in the context of reviews received from specialists and customers. The review will include models produced in 2016 and 2017, as well as samples released several years earlier, but still being sold.

Reviews from specialists and buyers

Choosing a geyser is not an easy task, because every consumer wants to have high-quality and reliable equipment at their disposal that will not be bothered by frequent breakdowns and leaks. Especially for you, we have compiled a unique rating of geysers in terms of quality and reliability, collecting the most popular models.

Alexander, 47 years old

The best geysers are made by the Conord plant. It probably couldn’t be simpler and more reliable. I bought the speaker for 4 thousand rubles. The Don water heater is lightweight and reliable, with a beautiful front panel and good performance. Connects to a regular chimney, and in its own way internal structure she simpler than a brick. Three years have passed since installation, during which time there has not been a single breakdown. It makes moderate noise, like any other model with an open combustion chamber. It’s easier to adjust the final temperature with a mixer to your liking.

Flaws:

• Demanding on batteries - we tried using cheap batteries, they ran out in literally 3 weeks. Therefore, you have to buy expensive alkaline ones;
• I didn’t really understand the purpose of the “winter-summer” knob - as a result, the column works year-round in one position of this knob;
• The adjustment knobs are not the most accurate - you have to suffer before you get the desired mode.

Russian geysers the better that they are adapted to our conditions.

Efim, 34 years old

I was faced with the task of choosing a gas water heater for a private home. The double-circuit boiler was immediately brushed aside - I work in a heating equipment store and I know how much trouble this unit can cause. It is best to install a separate heating boiler in the house, and in conjunction with it a boiler and instantaneous water heater. I didn’t have room for a boiler, so I settled on a simple gas water heater. It does have some drawbacks, but I don’t see the point in overpaying 10-15 thousand rubles and getting about the same thing.

Advantages:

• There are no unnecessary functions - believe me, all of these additional options in most cases they are not needed, you are unlikely to use them;
• Quite quickly reaching the set temperature;
• It ignites quickly and without making a noise.

Flaws:

• Sensitivity to the temperature and pressure of incoming water - at the slightest fluctuation in these parameters, the outlet temperature begins to “float”;
• It may go out when you try to add cold water with a mixer - this happens when you suddenly open a “cold” tap.

But in general, the device is very good, it has been in the house for two years, there have been no problems so far. Although I know a lot of examples when complex double-circuit boilers started to fail in the second year.

Kirill, 34 years old

It’s hard to find a better one for an apartment than this geyser. One of the most reliable devices I have ever installed. The most difficult thing is to persuade the client to pay a significant amount for this model, since everyone is trying to save money. The manufacturer has done everything possible to make the water heater truly reliable. Inside we will see a durable heat exchanger that takes maximum heat from the burner. The unit is equipped with electric ignition, unlike older models that had an igniter. Therefore, now there are concerns about own safety unnecessary.

Advantages:

• High efficiency - on average, this figure is higher than that of most models. In practice, this leads to savings of several percent on gas fuel;
• A solid heat exchanger - this is not foil, but durable metal. As a specialist, I can say the same about the burner;
• The desired temperature can be easily set without tedious turning of the knobs.

Flaws:

• When you turn it on, sometimes it manages to overheat the water, so you don’t need to immediately put your hands under the stream - it’s better to wait a few seconds;
• Older models use ignition with a pilot light, which can overheat the water even more during the initial start;
• If you open two taps at once, the gas water heater may not be able to supply the required amount of water.

If you need a gas water heater for a private house or apartment, and you don’t want to waste money, it’s best to pay attention to this model.

Alexey, 29 years old

Our company recommends modern geysers for apartments and private houses. The time of using traditional units with simple mechanical controls has already passed. The future belongs to more advanced models with electronic control. A typical example of this is a device from Hyundai under the tricky name H-GW1-AMW-UI305. Its productivity is 10 l/min, the maximum heating temperature is +60 degrees. There is electronic flame modulation here - the geyser can independently maintain the set temperature. It also has a self-diagnosis system that detects breakdowns.

Advantages:

• Stable outlet water temperature – forget about constant fluctuations;
• Reliable heat exchanger - will last for several years without repair or replacement;
• Convenient electronic control - just set the desired temperature and forget about further settings.

Flaws:

• You cannot enable two parsing points at once - it is best to use them in turn;
• It doesn't work as quietly as we would really like.

The main advantage is the optimal ratio of price, quality and functionality. There is nothing superfluous, there is flame modulation, a long service life - it’s simply not better to find.

The estimated price of this model on the domestic market is about 7.5-8 thousand rubles. It is better to buy a geyser in an online store, where its price may be lower.

Oleg, 30 years old.

My grandmother’s old Soviet-made gas water heater broke down - it often leaked, and during operation it hummed and made noise like an aircraft turbine. We went to the store to choose a new one. We put Chinese models aside, they are unreliable, often break, and the quality of their internal filling does not stand up to criticism. We settled on the model from well-known company Ariston, with electronics. But they didn’t notice the expected quality, that China and Italy are all the same. Within six months, a puddle of water formed under the gas water heater, and then the controls failed. It would be better to take Bosch than this defect. Although they say that the quality of Bosch has also deteriorated, so it is not clear what is better now.

Advantages:

• Compactness - the device is really small and neat, smaller than its Soviet counterpart, which went to the landfill;
• The geyser is equipped with a fan, so interruptions in draft do not affect its operation;
• It shows the temperature on the screen - you can’t imagine anything better, but previously you had to set the optimal temperature for water by touch.

Flaws:

• Weak heat exchanger - leaked quickly;
• I had to invite a specialist to install it - otherwise they threatened to void the warranty;
• Lack of resistance to voltage surges - I had to buy an additional stabilizer;
• We thought that it would work quietly, but that was not the case - it is noisy.

We spent almost 11 thousand, but received some Chinese fake. I advise you to better analyze reviews of geysers in the future so as not to buy a pig in a poke.

Mikhail, 38 years old

The store told us that it is best to buy geysers from domestic producers– they say, they are inexpensive, easy to repair, and work reliably. They recommended taking the VPG-6E model, and we decided to listen to the advice. This is not to say that the unit works without failures. Firstly, 10 months after purchase it began to drip - the heat exchanger had leaked. And secondly, without a display it turned out to be not very convenient to control the temperature. Cousin, who works as a heating engineering specialist, said that it is better not to buy such equipment in the future - it is no different from Chinese heaters.

Advantages:

• “Iron” ignition activation when opening the tap;
• Small thickness of the case - only 14 cm;
• Easy to install yourself - the device weighs only 6 kg.

Not the most successful model, there are better ones.

Vladimir, 56 years old

I work in a small store as a storekeeper, and at the same time I am responsible for the supply of equipment. We have Chinese geysers on sale, as well as their approximate analogues from the Neva brand. IN Lately We refuse the cheapest models, people often complain about them, so we carry them less and less. The exception is the good model Neva Lux 5514. It has increased productivity, the weight is 12 kg - this indicates the use of high-quality components and a good heat exchanger (without saving on metal). As far as I know, complaints about this column are rare, even though many components are made in China.

Advantages:

• Good work at two water points - productivity is 14 l/min;
• Batteries last a long time, but it’s better to take good alkaline batteries rather than junk from stores with fixed prices;
• Can heat water to very high high temperatures, but it is best to limit it to reasonable limits so as not to injure the heat exchanger.

Flaws:

• In order for the heat exchanger in a geyser to last as long as possible, it is best to place a good filter in front of it. Otherwise, it quickly becomes clogged or leaks form;
• The model is noisy - it’s amazing how this can be achieved in our time;
• I heard from people that the speaker can burn a little immediately after turning it on - it’s not very clear why this happens.

If you want to purchase a domestic geyser, it is best to choose this model.

Innocent, 46 years old

If you want to provide hot water to two water points at once, it is best to choose a gas water heater with good performance. I recommend the Bosch WR 15-2P model for purchase. Indeed, Bosch used to be much better, but compared to what the Chinese are doing, this speaker is simply a standard. It has certain disadvantages, which I will definitely tell you about. But it is a leader in terms of price/quality/functionality ratio. I recommend her to all my clients, rarely anyone is dissatisfied.

Advantages:

• Does not make noise - this is a truly low-noise model. It ignites smoothly, without rattling or plaster falling off the ceiling;
• The case does not overheat - therefore, the speaker can be used in the most intensive mode without fear of its failure;
• It won’t scald your hands when you turn it on – here I’ll note a smooth increase in temperature, without jumps.

Flaws:

• If the heat exchanger deteriorates, repairs will be expensive - this is the main disadvantage. In order for the geyser to last a long time, it is better to study the quality of the water and ensure its filtration;
• The gas unit is weak - it’s better not to adjust the temperature with the mixing knob cold water, otherwise it may fail;
• There is no automatic flame modulation - if it were here, it would be an ideal gas water heater.

Dmitry, 38 years old

When I arrived at the store, I immediately indicated to the salesperson that I wanted the model with maximum performance. The seller said that it is best to take a powerful device from Rinnai. I had to wait two weeks for delivery, since the model was not in stock - they rarely take it. But the wait was worth it, as this is truly the best gas water heater I have ever encountered. The water can heat up to a record +70 degrees, the combustion chamber is closed, so I didn’t need a chimney. There are smart electronics on board that monitor overheating and safety. You can safely leave a gas water heater in an unheated house, as it has protection against freezing.

Advantages:

• Convenient digital controls - there are no outdated antediluvian knobs;
• Capacity up to 24 l/min - if you open two taps, the temperature and pressure will not change;
• There is a gas leak monitoring system;
• Convenient temperature control using the display.

Flaws:

• I had to call a specialist for installation, otherwise they would not provide a guarantee. Soon it will probably be impossible to change a light bulb yourself;
• Expensive – I had to pay 35 thousand rubles for a gas water heater.

There are almost no shortcomings, the device works at 5+.

Igor, 41 years old

I devoted almost 15 years of my life to repairs gas equipment, including speakers. Not long ago I got a job at an installation company, we do heating in houses, we install equipment for heating and hot water preparation. A couple of months ago, equipment was installed in a small low-rise residential complex. Boilers were installed in each townhouse autonomous heating, geysers were used to organize hot water supply Zanussi GWH 10 Fonte. This scheme ensures maximum maintainability and increases the reliability of heating and water supply systems - these are not double-circuit units that plague you with heat exchanger breakdowns. There were a lot of townhouses, but during the entire period of operation of the speakers, we received a complaint from only one homeowner - his heat exchanger was leaking. Well, factory defects always have a right to exist.

Advantages:

• Affordable price - initially it was planned to buy Chinese gas water heaters, but then they would definitely have bombarded us with rotten eggs and tomatoes. Therefore, we decided that it was better to go with Zanussi;
• There is no problem with frequently leaking heat exchangers, despite their low cost. This is partly due to good water;
• If something goes wrong due to small things, then repairing a geyser will not cost half of its cost - you can’t imagine anything better;
• Accurate ignition, without pops.

Flaws:

• When the pressure changes, it responds with a change in temperature - but this is quite expected;
• It is not recommended to adjust the temperature with a mixer; it is better to do this on the gas water heater itself - this way it goes out less, although I consider this a disadvantage. After all, that’s why it’s a faucet, so that you can adjust the temperature yourself without jumping out of the bathroom into the kitchen;
• For the correct operation of a geyser, it is best to purchase good, expensive batteries - this results in extra costs, but the ignition works more stably and for a long time.

It is better to take a gas water heater from Zanussi than from an unnamed Chinese manufacturer.

Video