home / Plastic panels/ How to make a decorative palm tree from plastic bottles. How to make a palm tree from plastic bottles

How to make a decorative palm tree from plastic bottles. How to make a palm tree from plastic bottles

Olesya S.

Date palm, coconut palm, banana palm. Which one do you like? Today we will make an evergreen, beautiful palm tree from plastic bottles, which will decorate your estate and give you an exotic and warm mood. Feel the tropics right in your own backyard thanks to the very simple master class on how to make a palm tree with your own hands.

For the manufacture of exotic wood from plastic bottles you will need the following materials:

Brown plastic bottles of the same diameter (approx. 2 l.), for the barrel;
Green plastic bottles (allowed different sizes) for palm leaves;
Scissors, stationery knife;
Scotch;
Plastic pipe or metal rod.

1. Let's start making the palm tree trunk. To do this, take a brown bottle and a knife. Remove the cork; you won't need it anymore.

2. Cut the bottle crosswise, with the bottom part being slightly larger than the top.

3. Cut the part of the bottle with the neck into six equal parts with scissors, reaching the beginning of the narrowing of the upper part, stop. Each cut part should be shaped into an oblong triangle or petals. To do this, round and narrow the cut parts.

4. Do the same procedure with the remaining half. Also use a hot knife or awl to make a hole in the bottom of the bottom half of the bottle with a diameter the size of the neck hole.

5. Make a fold at the base and bend the resulting plastic petals one by one.

6. Having opened all the petals, you get a hexagonal flower.

7. Do the same procedure with the other remaining half.

8. Cut the remaining brown bottles in the same way, make cuts and form petals. You will end up with many halves that will need to be inserted one into the other, with the neck facing down.

9. Let's start forming the trunk exotic beauty. To do this, take a metal rod or plastic pipe and thread all the blanks of the brown bottle onto it. Secure the lowest part with tape. When forming a trunk, it is important to distribute the bottles so that the petals occupy all the free space and do not leave empty seats(V checkerboard pattern). The height of the palm tree depends on the number of blanks. The palm trunk is ready!

10. Let's start making palm leaves. To do this, take green bottles and a stationery knife. Remove the caps from the bottles; they are no longer needed.

11. Cut off the neck and bottom.

12. Then cut the resulting workpiece lengthwise into three identical parts, starting from the bottom, not reaching the top by about 2-3 centimeters.

13. Open the cut parts, leaving a hole in the center for attaching the greenery to the base of the trunk.

14. Bring the foliage of the palm tree to a natural and familiar appearance. To do this, make cuts on all sides of the petal, not reaching the middle by about 1.5 centimeters.

15. Round the petals a little and make the cuts diagonally.

16. Fold the resulting thin stripes. Thus, the foliage of the palm tree will become more luxuriant.

17. Do the same with the rest of the remaining petals. For more lush greenery use palm trees a large number of green bottles.

18. Let's start assembling this exotic beauty. Place the made plastic greenery on the remaining pin of the previously prepared table. If the bottles are different in size, then place the large ones first, and then the smaller ones. To form a palm tree cap, you need to lay the bottles in a checkerboard pattern to get rid of unnecessary spaces of greenery. We attach the last green blank to the pipe with tape. To prevent the palm from being blown away by the wind, it is important to secure it by burying the bottom of the rod on which the palm blanks are threaded into the ground half a meter.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

Now it is becoming fashionable to equip garden plots with artificial trees. If during the hot summer your family likes to frequently drink refreshing soft drinks, then you should not throw away the containers from which you can make a palm tree from plastic bottles. Such a decorative product will significantly decorate any area of the country yard. Making an overseas site is not difficult. This will require a large number of bottles and a little personal time.

Benefit from the idea

Plastic food containers are made to store various drinks, and, as a rule, the material does not decompose quickly and can rot for hundreds of years. In addition, if there are no specialized landfills at the place of residence for the disposal of such waste, then people will have to throw away the containers near their home. This, in turn, will pollute the area.

Of course, you can find a different approach and burn the garbage, but this will pollute the atmosphere; in addition, there are already enough harmful sources that destroy the environment. There is another unique approach - plastic bottles can be used to make any decorative items, for example, palm trees.

From such a seemingly useless container you can make evergreen tree. You just need to take bottles of brown and green colors. If there are children in the family, then it is advisable to involve them in this exciting activity. You can decorate with a plastic palm tree:

empty garden plot;
the area located near buildings;
playground for children;
house area;
a piece of land near an artificial pond.

An artificial palm tree brings great effect if it is located near a playground. This is a win-win option, children will rejoice at such a creation.

Even those parents who are not at all versed in creativity can make a palm tree.

If you only have transparent drink bottles, then don’t be upset, because purchasing paint will correct the whole situation. The leaves are colored green color, and the trunk is brown.

Materials and tools

Before starting work, the master needs to stock up on everything necessary. It is worth noting that the larger the volume of the bottle, the more magnificent the artificial palm tree will be. List of tools and materials for making an evergreen tree:

long plastic pipe or iron fittings;
braided wire or thick rope;
tape or glue;
plastic bottles;
scissors or stationery knife;
If you are using transparent containers, purchase brown and green paints.

If there are a large number of bottles available, then it is advisable to choose the same sizes. In this case, the tree trunk will look much more beautiful. But bottles for leaves can be used different diameters. Small ones are suitable for creating foliage in the center of the crown. Half-liter or liter brown containers are useful for small palm branches. It is not necessary to look for the container that has a certain green tint. You can combine colors. It will even improve the palm tree.

Step-by-step production of a man-made tree

To do a quality job, you need to carefully study all the nuances of creating a plastic palm tree. According to the stories of craftsmen, assembling the structure takes only a few hours. A palm tree made from plastic bottles is built with your own hands step by step in four stages:

creating a plan and choosing the location of the structure;
installation of prepared foliage;
barrel manufacturing;
turning all the parts into wood by fastening them.

Important! Found bottles must be washed from dirt and thoroughly wiped with a rag. Pasted labels also come off. To do this, simply lower the container into warm water until the paper becomes limp and wipe it off with a cloth.

In fact, there are many master classes on creating bottle palms. But this option is the best and most popular, because the result is a truly realistic tree. And if you find large bottles, the tree will become more magnificent and beautiful.

Drawing a sketch and selecting a site

At the beginning of the work, a simple sketch is created and you need to calculate required amount bottles for the entire structure. It is important that there are enough bottles for assembly, otherwise you will have to go looking for other vessels. The first stage of how to make a palm tree from plastic bottles:

The diagram shows the size of the barrel and other details.
Then the location of the product is selected. It is enough to go out into the courtyard of the dacha and take a close look at exactly where the structure will look best.
If there is a gazebo at the dacha, then it would be great to install artificial trees near the building.
You should not place the palm tree in areas through which traffic will move; naturally, the structure will interfere. For example, it is not recommended to place a tree very close to the gate.

In any case, all the details are thought through.

Foliage cutting

After preparatory work Palm leaves are made. You will need to take a stationery knife or scissors, cable or rope. How to make a palm tree of their bottles - the second stage:

You can make different crowns, but, as experts say, for a good effect, the tree must have at least 8 leaves.

In this case, the decorative design will become aesthetically pleasing. For further assembly of the entire structure, a long stalk is attached to the finished leaves.

Making a barrel

At this stage the barrel is made. Take brown bottles and measure a few centimeters from the edge of the bottom. In this case, the bottom is also not required. The third stage of how to make a palm tree with your own hands:

You need to make longitudinal cuts to get identical petals. The cut is made from the very edge where the bottom was cut off, not reaching the end of the neck by 10 cm.
In this way, all the details of the future trunk are prepared. Only in this case you should not make thin strips, but rather make 8 or 16 parts on the bottle.
At least 8 branches are attached to the main trunk. It will be good if reinforcement is used. You can cut a certain number of rods and weld them.
Assembling the trunk is similar to making the foliage. On plastic pipe or metal reinforcement, finished parts are strung one after another. To make the palm tree stable, a wooden platform is attached at the bottom of the trunk. It is enough to cut a piece of plywood and screw the pipe. And if reinforcement is used for the barrel, then 2 short rods are welded in a cross shape. Then a barrel is attached, which is welded to the structure.

Some craftsmen simply take and plant the rod deep into the ground. In any case, there are many ways to install the barrel.

Securing all parts

At the last stage, all parts are connected. To install the structure, you need to take the blanks to the chosen place and carefully lay them out, especially the foliage that is on the rope - you must try not to scatter it. The fourth stage, how to make plastic bottles palm tree:

The tree trunk is installed in the selected location. It can be driven in or secured to the platform. But it is important that the product is sustainable.
Now the lids on the leaves are unscrewed, and the blanks are placed on the branches of the palm tree. The parts are secured with glue or tape. But it is important to carefully glue the outermost sheet, which should fix all the lower ones. This way the entire top is created.
In principle, the design is ready. It remains to correct some parts that were skewed.

Usually one palm tree is not enough. It is advisable to make at least 3 pieces. After installing all the trees, the area is covered with sand. Next, along the perimeter of the decorative zone they lay natural stones. They will not only decorate general form, but also will not allow the sand to wash out during rain.

Paper palm tree for apartment

Craftsmen make many crafts using glue and colored paper. Such creations will not only delight the whole family, but will also decorate the interior of the apartment. A paper palm differs from a plastic one primarily in material and design. And it will take very little time to make. First, tools and materials are prepared:

scissors;
brown paper;
green paper;
copper or aluminum wire 30 cm long;
glue.

After preparing everything necessary, they begin to make the tree trunk. You will need wire and brown paper. You need to wrap pieces of paper around the wire so that they are pressed tightly. Then take another sheet of brown paper, and cut strips 3 cm wide on it. Each element is folded 7 times, from which you need to make a fringe.

Next, the blanks are glued to the frame, on which the primary layer is tightly wound and fixed. A strip is taken and inside Glue is applied, and then the material is tightly wound at the very base. To obtain the volume of the barrel, several pieces of paper will have to be wound on a certain section of the frame. That is, the first layer, then the second, and then the third.

After making the barrel green leaf paper is divided into 4 parts. The same procedure is done with another sheet. On a piece of paper you need to draw the shape of a palm leaf with a pencil. Then the leaf shape is cut out with scissors. There will be 8 such parts. Also, several sheets are prepared, 2 times smaller than the previous ones - they will be installed at the very top of the craft.

On last step All parts are assembled. First, a paper platform is constructed and a palm tree trunk is glued to it. Craftsmen use thick cardboard, but yellow. After gluing the part, the foliage is secured. Using glue, several small sheets are installed on the top.

After which the remaining leaves are glued at the same pitch. Job is done. All that remains is to choose appropriate place to place the product, for example, on a table near a window.

Realistic coloring

If you have minimal artistic skills, you can make a truly realistic paper palm tree. The tree is assembled in stages from the same materials, only ordinary thick white paper is used, and paints will also be required.

After assembling the tree, you need to arm yourself with a brush and put a photo of a real palm tree in front of you. The main task: to draw various details on the product. This does not mean that, for example, the trunk is painted with one brown. First applied light shade brown, and then, where there are shaded areas, they need to be brushed, but only with a darker shade.

After the base layers, all the details are drawn until the master achieves realism. Such manipulations are also carried out with foliage. You need to draw veins, dark and light areas, and so on on them. At the end, chiaroscuro is applied. Are used pale colors. The process is long, but the work will be worth the wait.

Attention, TODAY only!

Plastic bottles, this widespread container these days, can be perfectly used as a material for making a variety of decorative items. For example, palm trees, which bring a certain amount of exoticism to the most ordinary garden or country cottage area, to the yard, playground or flowerbed. If you are interested in how to make a palm tree from plastic bottles, we suggest detailed instructions and interesting videos.

To make a palm tree from plastic bottles with your own hands, you just need to follow these recommendations step by step

Step 1

Preparation necessary materials: a sufficient number of two-liter brown and green plastic bottles, a long support for the barrel, scissors.

Step 2

Making a barrel. To do this, take brown bottles, cut off the neck of one of them (it will go to the top), and the bottom of the rest. You can limit yourself to this. Or you can give the trunk a “ruffiness”: make vertical cuts around the circle of each piece, and then bend each of them so that it resembles a flower with sharp petals. After this, a long support is taken (a wooden stick or wire) and the resulting blanks are strung one on top of the other according to the pyramid principle.

Step 3

Making leaves from green bottles. This is done in two ways:

Bottles have their bottoms cut off. The resulting workpiece is cut lengthwise into two parts, but the spiral for the lid remains intact. All that remains is to give it the shape of a leaf (a palm tree usually has 8-12 leaves) - even oval, even with jagged edges, etc., depending on the manufacturer’s imagination;
The bottom of the bottles is cut off, and frequent vertical cuts are made on each blank, almost reaching the spiral of the cap. The blanks are inserted into one another and secured solid foundation made of wire or stick. The finished crown is attached to the trunk. You can make several crowns and attach them to the top in different directions.

Find out how to make soap bubbles at home and bring joy to your loved ones.
How to make a bird feeder with your own hands, read this article.
Step 4
Attaching leaves. There are also two ways here:
in a bottle for the barrel with the bottom left, cross-shaped cutouts are made in a checkerboard pattern. Their number should be equal to the number of harvested leaves. Then you need to insert the leaves into these holes and secure the crown to the top of the trunk;
the upper part of the barrel is left cone-shaped - the last bottle is secured with the neck up. The crown is fixed over the trunk so that it covers the support. With several crowns, it becomes necessary to use a pipe as a frame, to the sides of which “branches” are welded according to the number of prepared crowns. The frame is inserted into the top of the palm tree, and finished leaves are strung on it.

However, everyone who answers the question of how to make a palm tree from plastic bottles with their own hands will give a master class exclusively of their own. Some people do without support, others use five- or six-liter bottles for the trunk, so that the finished tree turns out squat, others pick up different colors. Someone actually took a log with a diameter of 14 cm as a base for a palm tree and nailed brown plastic bottle bottoms to it overlapping using hot nails, and made leaves by inserting green bottles into one another and then placing the structure on a wire (like the trunk in step 2 ).
Making a palm tree from plastic bottles is not that difficult: with a little skill and patience, you can turn any piece of land into a tropical island.

A palm tree made from plastic bottles creates an unusual harmony in the garden or on the property. It seems that you are relaxing on the seashore, and there are palm trees and sand all around)))). Today, dear friends, we will look at two interesting master classes on making a beautiful palm tree from plastic bottles with our own hands, the author of these master classes is Olga Akimova And Safter Yeshilev. It's no secret that the plastic bottle has captivated many of us, because it is a clean material that is very light and simple to use. In addition, what is also important is cheap material, which for many has great importance. Crafts made from bottles will last a very long time, because we all know that a bottle takes a very long time to decompose. Therefore, by making crafts from them, we cleanse environment and create something interesting and beautiful for ourselves. If you suddenly have a lot of plastic bottles, then it’s time to use them for their intended purpose, which means you can make a beautiful palm tree out of them, for example.
Probably many of us want the summer to last longer on their site, so the bottle palm tree will become a decoration on the site and will extend it for us at least a little in our imagination summer period. Olga says making a palm tree is very easy, even a beginner can cope with this task.

* Scissors.
* Metal rod.
* Drill.

Method for making palm trees from bottles:
Before making it, it would be good to first understand what size we will make the palm tree and where we will install it. If you have children, then make them such a palm tree on the playground. Believe me, children really like such crafts and they happily play near them.
We take plastic bottles and make sure that they are all clean; if there are dirty ones, then they need to be washed. Be sure to remove all labels from the bottles and then you can start making.

We take brown bottles and cut off their bottoms to the height we need.

Now we need to make the branches of our palm tree, for this we take a green plastic bottle and cut it along almost the entire length and then cut it along the edge (as if we were making terry stripes).

We take a drill and start using it to make holes in each brown bottle blank. The holes should be the same diameter as a metal rod.

We have all the blanks done, let’s move on to assembling the palm tree, let’s make the trunk. We take brown bottles and bend their teeth outward, and then begin to put them on a metal rod. We insert the bottle into the bottle one by one, look as in the photo.

On top, when the trunk is ready, we put on the leaves that we made from green bottle. We fix the leaves on the tree like this: when the last bottle is on the leaves, we leave the neck with the cork. We make a hole in the cork the size of a metal rod and fit it tightly, it holds perfectly, no other fasteners are needed.
That's all, the palm tree made from plastic bottles is ready. Look how beautiful Olga turned out and most importantly, such crafts will last you a very long time and are not afraid of either rain or frost.

Palm tree made from plastic bottles with coconuts

Different palm trees are needed, different palm trees are important. Sasha came up with a slightly different, but also very interesting and beautiful palm tree, and also with coconuts. Let's also look at the process of making it, because some people will like this palm tree and others will like it differently, everyone has different tastes.

To make a palm tree we will need:
* Green plastic bottles.
* Brown plastic bottles.
* Scissors.
* Metal rod.
* Drill.

Method for making palm trees with coconuts:
Let's first make a trunk, take 20 brown beer bottles. This is how many bottles Sasha needed to make one palm tree 1 m high.

Cut off the bottom of the bottle closer to the base. Then cut the bottle into five parts.

Now we will make the lower foliage from the green bottle. We cut off the bottom and cut it into 5 parts, you will need 3 pieces.

Then we cut out the foliage on it as shown in the photo.

We bend the foliage as shown in the photo.

This is how it should work out for you.

Take 2 liters. green plastic bottle.

We also cut off the bottom.

Cut almost the entire length into thin strips. The ends need to be sharpened.

Here is a blank for making a palm tree.

We begin to collect the lower leaves on an iron rod. First, insert the blanks that are cut into strips.

Then we insert the blanks on which the foliage was cut out.

Continue, cut from 2 liter bottle mahrushki

This is what the blanks should look like.

From a 1.5 liter bottle there is also a marushka mode.

To make palm branches you will need blanks from 1.5 liter and 2 liter bottles.

If you don't have a lot of green bottles, you can paint clear bottles with green paint.

We cut all the bottles into strips.

We put caps on all bottles and drill 8 mm.

Bottle necks can be inserted between bottles to save bottles.

0.5 l. We cut the bottles to size and insert them onto the ends of the branches.

Here are our blanks before assembly, you can get to work.

We first collect 1.5 liter bottles, and 2 liter bottles at the ends of the branches.

All that remains is to make coconuts, because we have a palm tree with coconuts. For this, Sasha used old balls and tied them with thin wire so that later he would have something to attach them to.

We paint them in Brown color. When dry, hang them on a palm tree.

Instead of a trunk, we use an old unnecessary pipe 15 and 2.5 meters high. We drill two 8 mm holes in it. Branches - 7 mm wire rod. 2 meters, 1 meter in each direction.

The palm tree with coconuts is ready.

A palm tree made from plastic bottles will take worthy place on your personal plot and will please the eye at any time of the year. Manufacturing plastic wood– the task is not difficult, the main thing is to find a sufficient amount of material. We offer step by step instructions for beginners how to make a palm tree from plastic bottles.

Step by step tutorial: How to make a plastic palm tree

First you need to prepare the materials. You can use brown and green bottles or clear ones and then paint them. You will need:

Plastic bottles of different sizes
Wooden stick or reinforcement for the frame
Thick rope or wire.

Conditionally palm making can be divided into three steps:

Making palm branches
Making a Tree Trunk
Combining all parts into one tree.

Step 1 . To keep the leaves wide, use two-liter green bottles. To do this, cut off the bottom of the bottle and cut the bottle lengthwise into 7 pieces. Give each leaf a suitable shape and make a fringe. For one leaf you will need about 10-15 bottles. Connect them through the neck using rope or wire. You can make small cuts lengthwise into the bottles, then the leaves will turn out fluffier.

Step 2: To make the tree trunk you will need brown beer bottles. Now you have to cut off the neck and work with the lower half-bottom. Make triangular cuts on each bottle blank, then carefully bend the edges outward. In the center of the bottom you will have to burn a hole with a heated metal rod, the diameter of which depends on the diameter of the base for the frame. The number of bottles depends on the desired height for your tree. Insert them one in one on the frame, and you get a trunk.

Step 3. Now you can begin to fully assemble the tree. If you strung the leaves on a metal cable, you can simply weld them to the trunk. To prevent the palm tree from flying away, make a foundation and dig the stem-trunk deep. Try making a small palm tree first, and then plant some more plastic trees next to it.

Palm tree made from plastic bottles

Fantasize, then your tree will be unique, and the site will be the most beautiful. Involve family members in preparing preparations for the palm tree, then you will have an interesting time together. We hope that our article is about how to make a beginner palm tree made from plastic bottles was useful and your garden area will be significantly transformed.