The right wallpaper for uneven walls. Which wallpaper to choose for uneven walls

How to glue wallpaper on crooked walls. Pasting curved walls and corners

Since not all walls and corners, especially in old houses, are straight, many people ask how to glue wallpaper on curved walls.

In this article we will try to answer these and related questions, and also analyze which wallpaper is suitable for curved walls.

Because the following information is specific, it may not apply to all cases.

And if your walls are smooth and the corners are perfect, just skip this article and read something else on our website wallpaper-steny.ru.

Wallpaper for uneven walls: features of use, selection and installation

Before gluing, you should try to level the walls and corners as much as possible.

The smoother the surfaces are, the it will be easier wallpapering!

2. At the second stage, it is important to choose the right wallpaper for curved walls.

The best option would be thick vinyl or non-woven fabrics with a matte or voluminous, but independent pattern.

NOT suitable for curved walls and corners:

• thin paper wallpaper;
• trellises with an even vertical pattern;
• canvases with a dependent pattern that has to be adjusted;
• photo wallpapers of all types.

3. To decide how to glue new wallpaper on curved walls, it is better to start from the window.

In this case, the first sheet should be glued exactly along a vertical line.

To apply perfect markings, use a level and a simple pencil.

4. The first sheet of wallpaper in a room with crooked corners is glued to the wall adjacent to the window so that an overlap is formed on the “ window wall» 3 centimeters.

5. The second strip is glued to the wall with the window and slightly overlaps the emerging section of the first sheet.

Take a longer ruler (or spatula) and apply it to the line of intersection of the second sheet with the first.

Using a knife along the ruler (or spatula), a deep cut is made in one go, for which the knife is not removed along the entire cut line, but only placed below the ruler.

IMPORTANT – the cut must be performed in one go, without removing the knife!

7. When the cut is made along the entire height of the canvases, you can remove the upper and lower cut sections by aligning the first or second sheets of wallpaper with the joint.

The joint should be smooth.

And to avoid mistakes, you can try to trim on some stand - on a clean and empty section of the wall, for example.

The quality of the pruning is very important and you only have one try!

The main thing is to monitor the vertical position of each subsequent canvas and make the necessary cuts in the corner areas.

9. You can hide unevenness in the floor area using a small wooden or plastic floor plinth.

10. Irregularities in the ceiling area are hidden using baguettes or panels.

Since the above was about non-woven or vinyl wallpaper, which looks luxurious and expensive, it is better to give preference to gypsum or wooden carved ceiling plinths.

If you use cheap foam plastic ceiling plinths here, their lack of solidity and cheapness can spoil the whole picture.

11. When gluing wallpaper to curved walls and corners, you should make sure that the joint does not lie exactly in the corner.

If this happens, then it is extremely difficult to adjust the evenness of the joint along an uneven corner line (how to mask joints).

As an option, glue the adjacent wall with a slight overlap over the problem area and trim as described above.

If all of the above procedures seriously frighten you, if you have doubts about own strength, you could hire a team of specialists.

At the very least, experienced workers will make curved walls and corners as invisible as possible. And along the way, you yourself will learn a simple technique for gluing wallpaper on uneven surfaces.

Is it possible to glue wallpaper over old wallpaper?

: how to glue paper wallpaper. : sticking paper wallpaper

What wallpaper to glue on the ceiling. Choosing wallpaper for the ceiling

How to wash vinyl wallpaper

How to glue wallpaper on drywall. Preparing drywall for wallpaper

How to glue non-woven wallpaper. Features of gluing

How to glue paper wallpaper

How to hang vinyl wallpaper on non-woven backing (step by step)

http://oboi-steny.ru

There are many shortcomings that spoil the walls and complicate repairs: cracks, unevenness, remnants of old coatings.

Ideally, the surface is carefully prepared before wallpapering.

But if the defects are not clearly visible and there is no time for leveling, you can use several solutions that will help hide imperfections and speed up work. Let's figure out how to choose the right wallpaper for uneven walls.

Solution 1: Wallpaper with a bright pattern

WALLPAPER VICTORA STENOVA GRAFFITI 998174

If the walls are not even, then you should give preference to wallpaper with a pattern. Plain coatings will only highlight all the imperfections and spoil general form rooms.

Abstract, a chaotically located pattern is best suited for uneven surfaces. It will divert attention to itself, and the imperfections of the walls will be almost indistinguishable.

The right choice would be wallpaper with small patterns, for example, flowers or a monogram. However, you should avoid a pattern that requires the selection of a pattern, otherwise the joints will further highlight the recesses and hills on the walls.

Wallpaper with geometric patterns is contraindicated for non-ideal surfaces. Any distortion of straight lines will immediately catch the eye and indicate all the shortcomings.

Another important question is how to choose the color of wallpaper for uneven walls. Light shades have the opposite effect: they increase the visibility of flaws. Therefore it is better to choose dark or rich colors. If such wallpaper is difficult to perceive and seems too gloomy, you can use a combination.

Uneven walls: hiding imperfections behind wallpaper

A bright accent strip covers that section of the wall where the unevenness stands out most clearly, and discreet wallpaper is glued to the even parts.

Solution 2: Texture wallpaper

WALLPAPER BRAVO STEIN 80583BR23

Regular smooth wallpaper does not cope well with surface imperfections, but textured ones can hide them more effectively. Such wallpapers include varieties of vinyl and non-woven coverings and photo wallpapers. The most important thing is the convex pattern.

Foamed Vinyl performs the task perfectly. The dense base and voluminous relief of such wallpaper will mask flaws and decorate the room. Hot stamping also suitable for such cases. These coatings are durable and have a textured surface, which means imperfections will be completely invisible.

Non-woven wallpaper for painting — indispensable assistant under repair. You can choose different relief patterns and paint them in suitable color. In this case, the unevenness will visually disappear, and the walls will appear smooth.

Wallpapers and photo wallpapers, imitating natural textures, will cope well with problematic surfaces. Coverings imitating stone, brick or plaster create a special stylistic mood in the room and turn the disadvantages of the walls into advantages.

It is important that such wallpaper be matte. The play of light and shadow on glossy wallpaper will make unevenness visible.

Solution 3: Thick wallpaper

WALLPAPER MIRABELLA ANACAPRI 1 37301

Wallpapers differ in the density of the material from which they are made, which means they have different masking abilities. Single-layer paper wallpaper is the thinnest option, so it's not The best way eliminate wall defects. For such cases, duplex consisting of two layers is more suitable thick paper. These coatings are inexpensive and easy to use.

The properties of vinyl and non-woven wallpaper are much better. Coverings with a vinyl layer, especially foam and hot stamping, have increased density- 200-250 g/m2, and for some manufacturers it can reach up to 400 g/m2. They are easy to clean, resistant to damage, but most importantly, they hide uneven walls.

Non-woven wallpaper is heavy and has a significant thickness. This means that they will not only last for many years, but will also save time on preparing walls and sealing small cracks.

There is little difference between how to glue wallpaper on uneven walls and pre-prepared ones. But there are several nuances that affect the final result:

1. stripes are measured with a margin. The worse the quality of the walls, the more centimeters need to be added to the top and bottom of the panel;
2. if the walls are noticeably crooked, then when gluing the canvases, a plumb line and level are used. The first strip is glued strictly vertically, and the rest are aligned along it;
3. To make the wallpaper joints even and strong, it is better to glue the wallpaper overlapping. Otherwise, distortions on the walls will spoil the final result;
4. small curvatures are successfully hidden with high-density wallpaper - vinyl or non-woven. They can be glued end to end;
5. if the ceiling also has defects, then the uneven edge of the strips can be covered with a ceiling plinth.

Walls with defects and unevenness will not hurt high-quality repairs And beautiful interior. The most important thing is a competent approach to the choice of finishing materials and taking into account the characteristics of their gluing.

Choosing wallpaper for uneven walls: 4 types of coatings that will hide unevenness

If this question comes to your mind, it means you don’t have the time, desire, or money to properly prepare the walls for wallpapering.

Not the best the best option, but you need to get out of the situation... A few tips from professionals with many years of experience, seen and different walls and different wallpapers.

We asked the question: “What wallpaper to glue on uneven walls?” several masters and systematized the answers.

First, about what kind of wallpaper to glue, but crooked walls are strictly forbidden:

• Any shiny (glossy) wallpaper is especially smooth. They will highlight any irregularities very strongly.
• The same can be said about any thin wallpaper, they will simply cover all the imperfections of the walls.
• Wallpaper with geometric patterns, especially with stripes, is absolutely not suitable. Any distorted straight line is immediately visible.
• White and light wallpaper. As a rule, if the walls are not leveled, then the color to them will be spotty and all this will show through.

Now let’s talk about what options remain in stock so that, despite the uneven walls, the pasted wallpaper will hide the deficiencies of the preparation and, in general, everything will look decent:

• It is better to take paper wallpaper or vinyl wallpaper on a paper basis - they are better adapted to such tests, and when drying on an unprepared surface, they stretch and can hide some of the depressions on the walls.
• The color of the wallpaper is quite dark, for example brown.
• Necessarily matte coating, the relief will not be superfluous at all, foamed vinyl, embossing
• The drawing should be abstract and large (large flowers, leaves, various color spots, or very small and not periodic.
• It is advisable to find wallpaper without a pattern, i.e. those that do not need to join the pattern. It will not be possible to make an exact joint on uneven walls and, as a rule, it is uneven joints that spoil appearance most.

That's all the main ones

From the author: Summer is in full swing, everyone is relaxing and enjoying the sea, and you have to urgently correct repair defects and figure out how to hide uneven walls? We welcome you to our website, we are ready to help and tell you about the main things designer secret. Let's work on the mistakes and determine which wallpaper to choose for uneven walls! Let's try to find a solution to the problem together.

First you need to decide on the design, layout and choice of materials, and finally - on the final type of finishing: will it be plaster, drywall or decorative wallpaper. Agree, this sequence corresponds to most construction repair work. It’s quite difficult to decide on what to choose, especially with the current volume of products offered. building materials, as well as information articles on the World Wide Web. We will try to help you with this. You have already taken the first step - you have chosen our website!

Assessing the situation: we perform surface defect detection

Smooth walls are very good, because such a surface makes it quite easy to carry out Finishing work of any complexity, and even more so. But, as disappointing as it may be, very few can boast of a perfectly smooth wall surface in their premises, especially in standard apartments old building.

Important: in a situation with large differences and obvious defects on the walls of your rooms, you need to approach the repair work with the proper consistency and thoroughness, so to speak. Uneven walls can and should be leveled! If the defects are minor, then you can save money and time and use design secrets.

When choosing wallpaper in a situation where there are uneven walls, it is important to be guided not only by personal taste and preferences regarding color range and style, but also the problem of defects. Manufacturers, of course, know about the existence of such a problem and are ready to offer quite wide choose wallpaper that can be glued without much difficulty to problematic walls. After all, due to their characteristics, appearance and performance properties, they are suitable for gluing to any surface, including those with protrusions, bumps and depressions. Texture and pattern will help hide and camouflage defects and unevenness of the walls. So all that remains is to decide which wallpaper to choose.

What do our people advise us? experienced craftsmen, what wallpaper do they prefer during renovation to hide unevenness? We invite you to listen to the recommendations:

Types and characteristics of wallpaper

Let's look at photos and the most common types of wallpaper that can be successfully used for problem walls.

Duplex

If you glue ordinary paper wallpaper to walls with defects, then all these defects will clearly appear. Manufacturers offer to use a special type of paper wallpaper called duplex. They are made from two thick layers of paper, which are pressed into one piece and feel like cardboard. They also feature various types embossing and often repeating patterns, which allows. Among other things, they hold their shape well and stick perfectly to an uneven wall, because they do not need to fit tightly over the entire surface. All potholes and bumps will be hidden! And such wallpapers are very affordable in price; any average person can afford them.

Important: An additional property of the duplex is environmental friendliness, which allows it to be used in a nursery and bedroom!

Source: this-wallpaper.ru

Vinyl

Durable and bright. Vinyl samples are a good alternative to duplex wallpaper, although they are already in a higher price segment. They will serve you for a long time, remaining bright and fresh. In addition, on bright wallpaper, the unevenness of your walls does not stand out so much, and the thickness and deep texture will allow you to hide the most complex defects. Among other things, they have the ability to copy texture natural materials for finishing, which will give your room a noble, “rich” look.

Source: alberomarket.ru

From total mass vinyl wallpaper, which are used when finishing walls with unevenness, the following directions can be distinguished:

• quite simple and inexpensive option is foamed vinyl; its sufficient thickness will hide all surface defects. The disadvantages include the relative fragility of this material, as well as its insufficient strength. However, from an aesthetic point of view, such wallpapers will look better than duplex ones; we advise you to pay attention to them before considering more expensive options;

Source: remontiruem.com.ua

• Wallpaper made of washable vinyl will look good and practical in the kitchen. It should be taken into account that on their glossy surface it is the bulges of your walls that will be clearly visible, so we advise you to remove them; it is better to leave the recesses and pits;

Source: kuhniclub.ru

• A great option is hot-stamping vinyl wallpaper - the fabric is the densest, strongest and most durable. They can be washed repeatedly, and the structure allows you to hide fairly large areas of uneven walls. The only thing we recommend is to abandon the glossy design of such wallpaper, since it will flicker at the bends in the places of depressions and bulges. The price of such wallpaper is quite significant, but their quality is correspondingly impeccable.

Source: chipak71.ru

Non-woven wallpaper

A good material for hiding unevenness is also non-woven fabric - a combination of paper and fabric components. It has a high density and relief embossing on the surface. Wallpaper made from it is very dense and hard. Sometimes added decorative detail- vinyl backing. Non-woven wallpaper comes in white and colored. Most often they are made white, ready for further coloring. Painting is done after gluing the sheets to the wall. Painted wallpaper has a matte appearance, which further helps hide uneven surfaces.

The most common difficulties encountered when renovating an apartment are uneven walls and ceilings. Most finishing materials either fit poorly on them or emphasize this defect significantly. For example, painting uneven walls, applying liquid wallpaper or decorative plaster, alas, it’s impossible: the unevenness of the walls will become so obvious that it will “disturb” even psychologically. In a good way, you need to hire a special team to perfectly align the walls. But this, naturally, will cost a pretty penny. So what to do with uneven walls? Cover them with special wallpaper.

Actually there is a large number of varieties of wallpaper, but not all of them are suitable for uneven walls. Two varieties are suitable: vinyl and non-woven wallpaper. Both are distinguished by high density, multi-layering and embossing, which allows you to “level” the walls, both physically and visually. In appearance, vinyl wallpaper (also washable) is smoother and shiny. Non-woven ones are more noble, matte. That’s why non-woven ones are recommended for living rooms and bedrooms, and vinyl ones for hallways and kitchens.

Vinyl wallpaper comes with various additives in its outer layer. This can be mica powder and metal particles added to foamed vinyl, then the design of such wallpaper is called “silk effect”. And they come with the addition of artificial silk fibers. This design is called silk screen printing.

Non-woven wallpaper is the most leveling due to its density soft lining. Well, the top layer is paper with special additives. It’s interesting that when you need to remove this wallpaper from the walls, the top paper layer can be easily removed, but the interlining will remain on the wall. Thus, the walls will already be leveled to some extent - for new repairs, new wallpaper. Non-woven wallpaper can be either regular or paintable. The difference is that in wallpaper for painting, textile fibers are added to the top layer during production.

They say that only paper and textile wallpapers “breathe”, and all other “synthetics” are not environmentally friendly. This is not true. The fact is that both vinyl and non-woven wallpaper are produced with micropores. Well, non-woven fabric is also a breathable material.

Uneven walls: hiding imperfections behind wallpaper

Photo 1 of 10

01

Photo 2 of 10

Full screen Back to gallery

02

Photo 3 of 10

Full screen Back to gallery

03

Photo 4 out of 10

Full screen Back to gallery

04

Photo 5 out of 10

Full screen Back to gallery

05

Photo 6 out of 10

Full screen Back to gallery

06

Photo 7 out of 10

Full screen Back to gallery

07

Photo 8 out of 10

Full screen Back to gallery

08

Photo 9 out of 10

Full screen Back to gallery

09

Photo 10 out of 10 Naturally, if the room also has a crooked ceiling, it will be visible on the edge of the wallpaper. The only option here is to use ceiling plinth, and better plaster. Foam plinth may look primitive, since this wallpaper, as a rule, looks very noble.

So if you choose any of these two types of wallpaper, the walls will look smooth and you will avoid unnecessary costs.

Wallpapering walls is the most obvious and widespread way of finishing. But this finishing material has different characteristics and prices. What types of wallpaper are there, how they differ, where which is best to use - we’ll talk about all this further.

Classification by characteristics

In order not to make a mistake when choosing wallpaper, you need to have an idea of ​​what they generally are. Let's start with a general classification according to various characteristics and properties.

The first thing you should decide on is how friendly the finish should be with water and how often it will need to be washed. According to this feature they are:

This characteristic is displayed on the label of each roll in the form of a graphic icon - a wavy line (look at the photo).

Next, you need to decide on resistance to fading. It is no secret that some materials and paints change their color on sunlit surfaces. For sunny rooms, it is better to choose fade-resistant wallpaper. In rooms with windows facing west or north, this is not so critical. For those without windows (corridors, bathrooms, toilets, etc.) this does not matter at all. This characteristic is also displayed on the label with a sun pictogram (pictured below).

Resistance of wallpaper to fading - graphic designation

Fitting the pattern may also be important. Some colors do not require pattern selection or offset at all (plain colors). Others require displacement, and by different sizes. The displacement increases the consumption of finishing material. This information is also indicated on the label using pictograms.

All types of wallpaper are equipped with an instruction insert that displays this data. There are also pictures that show how to apply the glue. The method of removal is also shown - they are removed completely or partially. Next, we will consider the types of wallpaper - what they are made of, what advantages, disadvantages they have, and scope of application.

Paper

Paper wallpaper is the most common and cheapest. Their popularity is due to their low price, wide range, and good performance properties. They are environmentally friendly, permeable to air, but are afraid high humidity, have low mechanical strength, fade quickly. Average term service - 3-5 years. Not much, but this and all other shortcomings are compensated by a very attractive price.

There are several types of paper wallpaper:

When choosing, pay attention to such an indicator as density - it greatly influences the strength, but keep in mind that thick paper wallpapers are harder to glue to uneven walls - they are not as elastic as average ones. Very thin ones are also bad, since they, on the contrary, stretch very much, and when wet they can practically crawl apart in your hands or “roll”, go in waves, when you try to level them on the wall. All in all, best option- average. They will also cover up any imperfections and are easy to work with. The division is as follows: up to 110 g/m2 - light, 110-140 g/m2 - medium, more than 140 g/m2 - heavy.

If you need an inexpensive “breathable” material for wall decoration, paper wallpaper is practically unrivaled. When gluing, the simplest glue is used, which is applied to both the wall and the canvas (but not always, read the instructions).

Non-woven

Nonwoven is a non-woven fiber that consists of cellulose fibers(sometimes artificial fibers are used). This material has high vapor permeability, conducts air and moisture well, and comes in different densities. Thin non-woven fabric is a fairly elastic material that can be glued to uneven walls. But it stretches too much, which can be a problem. Canvases with medium and high density They are easier to stick, but they have practically no stretch, so the surface must be flat.

Please note that there are wallpapers made from 100% non-woven fabric, and some only based on it. Now we are talking about those that are completely made of non-woven fabric, since otherwise their characteristics depend on the second layer. By the way, when searching in the catalog, write “non-woven wallpaper with non-woven coating”, otherwise most of the results are vinyl wallpaper with a non-woven backing, and they have completely different properties.

Non-woven wallpaper comes in two forms - regular and “paintable”, and is glued with a special glue based on well-purified starch and/or PVA. They can be smooth, textured, embossed or voluminous. have good operational properties:

• When wet, non-woven fabric does not swell with glue or water and does not change its shape after drying.
• The preparation of the walls may not be ideal - due to the density of the material, some unevenness will be hidden, but large depressions and protrusions are unacceptable.
• Can be used in new houses - it does not tear when new small cracks form.
• Slightly reduces the thermal conductivity and sound permeability of walls (it is clearly not enough to significantly improve sound insulation, but read how to improve it).

Most non-woven fabrics on sale are imported, but there are also a few Russian ones (for example, Milassa, Loymina). They do not differ in price, so there is little point in choosing based on this criterion. When choosing, pay attention to the fact that the width is 53 cm and 105 cm, the length in a roll is from 10 meters to 25 meters. So the price per roll is far from an indicator. It’s easier to compare if you consider the price per square meter.

Vinyl

Vinyl wallpapers are paper-based or non-woven. A layer of polyvinyl chloride (PVC, PVC or, more simply, vinyl) is applied to the base. This film is less than a millimeter thick, but it gives the finishing material strength (can be washed with a brush), water-repellent properties, and high resistance to fading. Vinyl sheets can be washed, and many are abrasion-resistant and allow the use of a brush.

This set of properties allows you to use this type of wallpaper in rooms with high humidity, in particular in the kitchen or bathroom, but not in close proximity to water sources. It also works well where high durability of the finish is required (corridor, hallway) - you have to try hard to scratch it.

Another type of wallpaper with special properties is vinyl.

Their main drawback is that they do not allow air to pass through, so they try not to use them in residential premises or compensate by having a good ventilation system.

Types and varieties

Which vinyl wallpaper is better - paper-backed or non-woven? It is easier to glue on non-woven fabric, but only on a well-prepared base. The fact is that thin non-woven fabric is used as a base, and since the vinyl film is also thin, the overall thickness of the coating is small, they are simply not able to hide unevenness - all errors are visible. Another nuance - if the vinyl wallpaper is light, then the base should be a single color, otherwise the uneven color may show through.

If we compare vinyl and other types of wallpaper, they are the best in terms of strength and are easily glued to a relatively flat (maybe not ideal) surface. But, with significant unevenness, difficulties may arise - the dry fabric is glued and it is completely inelastic.

Vinyl wallpaper comes in a wide variety of colors. The surface can be smooth or textured. The design can be simply applied or can have volume (embossed wallpaper). There is also one for painting.

One of the types of vinyl wallpaper is hot stamping (silk screen printing)

Separately, it is worth mentioning vinyl wallpaper, which is produced by hot stamping using silk or artificial threads. They are called silk-screen printing for their characteristic shine. They look very formal, which is why they are often used in living rooms. Some types of silk-screen printing can be seen on the walls in the hallway - they make the room larger with their matte shine.

Vinyl wallpaper is sold in rolls 53 cm, 70 cm and 105 cm wide, the length of the roll is usually 10 meters (more precisely 10.05 m), they are glued with a special glue, as they have quite a lot of weight.

Read how to properly glue wallpaper.

Acrylic wallpaper

To be precise, this is paper wallpaper with acrylic coating. The polymer is applied pointwise, without completely covering the base, so it only comes with a textured surface. This has practically no effect on the number of colors, but on the weight - quite strongly. Acrylic sheets are not as heavy as vinyl sheets, which is why the glue used is not as thick. Thanks to the spot application of the polymer (it is itself airtight), this type of finish can be classified as breathable, which is why this type of wallpaper is often used in residential premises.

Acrylic wallpaper is a paper base (usually colored) on which acrylic is applied pointwise

Partial coating of paper with acrylic slightly increases its resistance to washing - they are classified as waterproof, fade resistance is average, as price category. They are glued according to the same principle as paper ones - glue is applied to both the wallpaper and the wall; difficulty of gluing is average. Problems may arise if acrylic coating too soft - you press a little harder and it comes off. Then they behave the same way during operation - the coating can be removed by accidentally touching it with something hard. Even with a fingernail. This does not apply to all types of acrylic wallpaper, but there are such examples. Overall, a good option, but not great.

The width of rolls of acrylic wallpaper is most often 53 cm, but there are 70 cm, and you can also find meter-long ones. The standard length is 10 meters. The price range here is greater than that of other types of wallpaper: there are very inexpensive ones made in Russia and Ukraine (cost from $3-5 per roll), there are imported ones - 8-15 times more expensive. It is worth noting that the quality, and appearance, differ significantly.

Textile (fabric)

Textile wallpaper is made from paper and non-woven fabric. A woven or braided material made of linen, cotton, viscose, jute, polyester, silk, etc. is glued onto this base. The texture can be smooth, silky, velvety. It depends on the material used and weaving technique. In addition, relief designs can be woven onto the fabric.

Textile wallpaper - looks great, but is expensive

Fabric wallpaper is another type of “breathable” wall decoration, therefore it can be used in living rooms. This is a very beautiful finishing material, but expensive. Even if we compare such not very cheap types of wallpaper as silk-screen printing or natural ones. At the same time, it is demanding in terms of operating conditions - it is afraid of high humidity, fades, and can only be cleaned dry, occasionally using a damp sponge.

There are two forms of release: standard - rolls 10 meters long (width 70-80 cm). Some textile wallpaper (more expensive) is sold by linear metres. Their width is usually 105-120, but there are also wider canvases.

The rules for combining wallpaper are described.

Glass wallpaper

Fiberglass wallpaper is special type finishing materials for painting. They are good because they are not afraid of moisture and can be glued in damp rooms. You just need to choose the right paint. Second positive point- they can withstand repeated repainting (the highest quality - up to 20 times) and their service life is 20-30 years. Other types of wallpaper are much inferior to them in this parameter.

Due to the interweaving of fiberglass, wallpaper is vapor-, air- and water-permeable. However, it is worth remembering that the properties of the surface being glued depend on the properties of the paint with which they will be coated.

If you need durable wallpaper that can be painted, choose one made from fiberglass

The disadvantage is that there is not a very large assortment, a somewhat “office” appearance, and also the fact that before painting they get into the air tiny particles glass It is also worth wearing protective clothing when working. Glue fiberglass wallpaper using a special glue that is applied to the wall

A very interesting coating, which is rather one of the subspecies plaster mixtures. Sold in powder form or ready-to-use formulation. It consists of astringent components (glue), textile fibers, cellulose, mineral and decorative additives. How putty is applied to walls with a spatula or something resembling this tool.

Important property liquid wallpaper- undemanding to the base. All other types of wallpaper require flat surface. Some are more even, some less. Liquid wallpaper itself can level the wall it is applied to. But, in order to save composition, significant recesses should first be sealed with suitable putty.

Liquid wallpaper is suitable for heated and unheated rooms, but requires normal humidity. Another advantage of this type of coating is its high maintainability. The damaged area is cleaned off, the resulting recess is filled with the same composition. Once dry, the repaired area is almost impossible to find. Therefore, some of the composition is stored “until required”.

Other types of wallpaper

The above describes those finishing materials that are presented in any hardware store. But there are types of wallpaper that are rarely used, but have good performance properties and look very unusual. This may be why they are not so widespread.

Now you know all types of wallpaper - both widespread and not so widespread. Knowing their main characteristics, you can choose the finishing material to suit the requirements of a specific room and your desires.

Despite the huge diversity decorative coatings for walls, wallpaper is still the most popular finishing material. But the technologies for their production do not stand still, and manufacturers offer many different types of wallpaper in appearance and properties. To understand which option to choose for decorating your home, it’s a good idea to understand what modern types of wallpaper exist.

Paper wallpaper

Single-layer paper wallpaper is the cheapest and most environmentally friendly, allowing walls to “breathe.” However, they are not very durable and strong, they quickly lose their appearance, get dirty, fade in the sun and absorb odors.

There are improved versions of paper wallpaper - two-layer duplex (smooth and embossed) and structured wallpaper, which consists of two layers of paper, between which pressed paper is randomly located. sawdust. Such wallpaper is more durable, can withstand wet rubbing, helps hide minor wall roughness and can be used for painting.

Vinyl wallpapers

Vinyl wallpaper is the most interesting material for finishing walls, since their manufacturing technology allows you to imitate almost any coating. They have two layers: the bottom one is paper or a fabric base, the top one is polyvinyl, on the surface of which embossing or a pattern is applied. Such wallpaper is easy to clean, does not fade in the sun, is durable, elastic, does not absorb moisture, but practically does not allow air to pass through. They are flat (silk-screen printing and acrylic), foamed, dense and embossed, for painting.

Foamed vinyl is a fairly thick wallpaper with a pronounced relief that successfully hides unevenness on the walls. In silk-screen printing, silk threads are sewn into the top layer, which gives the canvas shine and original look. Thick vinyl wallpaper has a smooth surface and is often used in the kitchen.

Embossed wallpaper - the thickest and heaviest, imitates ceramic tiles, a natural stone, Venetian plaster.

The main difficulty when gluing vinyl wallpaper is that it is very elastic. When glue is applied, they stretch greatly, and when dry they shrink, as a result of which the seams can come apart.

Non-woven wallpaper

Non-woven fabric is a mixture of cellulose and textile fibers. The use of this material expands operational and decorative capabilities and allows you to achieve. Wallpaper on a non-woven basis is produced in long rolls for painting.

Non-woven wallpaper perfectly masks cracks on the plaster surface and is suitable for almost any type of surface. When gluing such wallpaper, the glue is applied directly to the wall, and the canvases are applied to it dry, which greatly simplifies and speeds up the fitting process. When choosing non-woven wallpaper, it is important to know how to glue non-woven wallpaper and what glue to choose. When pasted, non-woven wallpaper almost never becomes deformed.

Non-woven wallpaper perfectly masks cracks on the plaster surface and is suitable for almost any type of surface.

Velor wallpaper

When making velor wallpaper on paper base special adhesive paints are applied, onto which tiny nylon fibers are attached. This wallpaper looks luxurious and is ideal for formal rooms.

They shimmer in the light, absorb sounds perfectly, but attract dust, are quickly wiped off from mechanical stress, cannot withstand changes in humidity and absorb odors. To glue velor sheets, use glue for heavy wallpaper.

Felt wallpaper

Felt wallpaper is made from acrylic, polyester and microfiber fibers, and they look like soft pile on the wall. The canvases look like fabric, and the joints between them are completely invisible. They are perfectly breathable and easy to clean. To reduce waste, felt wallpaper They sell not in rolls, but linear meters. They have a porous structure, so the glue is applied not to the canvas, but to the wall.

Textile wallpaper

Textile wallpaper consists of two layers: the bottom layer is made of durable paper and the top layer is made of woven material or threads glued together. They look impressive, absorb noise well, do not fade, are environmentally friendly and fireproof, but require careful handling and are more suitable for bedrooms, offices and living rooms.

Wallpaper is made from cotton, viscose and linen threads, as well as threads containing natural and artificial fibers.

For sticking textile wallpaper It is necessary to use adhesives for heavy wallpaper, soak the canvases for at least ten minutes, do not bend them after spreading, and also try to prevent the glue from flowing onto the outside and leaving stains.

Cork wallpaper

Cork wallpaper consists of bark cork oak and are the most environmentally friendly, since only natural products are used in their production. During hot pressing, adhesive substances are released from the cork, and it sticks itself together. The most common are paper-based cork wallpapers.

They are glued with glue for heavy wallpaper and adhere perfectly to any base, are wear-resistant, and coated with varnish or wax are well protected from moisture and dust.

Cork wallpaper consists of cork oak bark and is the most environmentally friendly.

Liquid wallpaper

The so-called liquid wallpaper allows you to create smooth or textured coatings with no seams and is a decorative plaster based on natural cellulose, cotton or textile fiber. They are sold ready-made or in the form of a dry mixture that must be diluted water-based paint and tint.

Liquid wallpaper is waterproof, does not absorb odors, is easy to clean, masks wall imperfections, is suitable for application to any surface and allows you to create any pattern.

Fiberglass wallpaper

The material is based on special glass fibers based on quartz sand, soda, dolomite and lime. They are moisture resistant, durable, fire resistant, do not contain toxic components, do not collect dust, are easy to clean, “breathe” well, can be applied to any surface and give any room an aesthetic and modern look. Fiberglass wallpaper is often used for wall decoration in offices, shops, hotels, medical institutions, etc. They can be painted and repainted many times.