A bench made of round wooden panels for the country house. How to make a bench with a backrest with your own hands

A light and comfortable garden bench can be placed on a cozy veranda or placed in the shade of trees so that you can hide from the heat and enjoy reading a book or a pleasant conversation. So, let's describe the main stages of its manufacture.

Whatever material you decide to make a bench from, to make it as comfortable as possible, certain proportions should be observed when constructing it:

• height: the seat is always located at a level of 0.5 m from the ground;
• width: at least half a meter;
• back height: 0.45 m;
• its tilt angle: ideal 45°;
• Armrest height: calculated from the seat level and should be 20 cm.

If the bench is dug into the ground, the length of the legs increases by at least 70 cm. In this case, its legs are lowered into the prepared holes, covered with stones and filled with concrete. Do not forget to pre-treat the wood with a solution that protects against rot and mold.

DIY bench step by step

Back and seat garden bench It’s better to do it not with a solid sheet, but to make a small distance between the boards. In this case rainwater the boards will drain completely, the boards will be better ventilated, and the product will be less susceptible to rotting:

You can replace the stain with a strong solution of potassium permanganate. Wood treated with a similar composition acquires a dark and rich color. Depending on the amount of manganese, you can get a walnut shade or a rich mahogany color.

Wide plank bench

Bench made of flexible vine or willow twigs

Eco-friendly garden furniture, not only a bench, but also chairs and even a table, can be made from pre-soaked willow or vine twigs. You can also use branches of hazel, willow, aspen or even birch, but in the latter cases the product will last much less and will look rougher.

To collect raw materials, you will need to wait until the shoots “ripen”. The optimal season for harvesting branches is from September to March. It is at this time that the rods acquire the required flexibility:

Types of benches

We have described only the simplest options for making a garden bench. It can be made from practically any materials:

If you are planning to make a wooden outdoor bench, it is better to use coniferous or larch, which is difficult to rot. Left by inheritance old furniture oak or hickory can also be used as a material to create a durable and very original garden product.

Should I buy a bench or make it myself?

Buying a bench for the garden is, of course, much easier. Moreover, the simplest of them are quite cheap.

But still, work done with your own hands will bring more satisfaction. And with a certain patience and dexterity, even made from improvised materials, it can become an exclusive work that you won’t be ashamed to show off to your friends and neighbors. For example, on next photo The bench is made of ordinary pallets, painted with bright paint and decorated with decorative pillows.

To apply for a loan online, just fill out an application form on the MFO website containing your passport details, the desired loan amount and some other information. Also, if you plan to receive money on the card, you will need to have a registered Visa or MasterCard with CVV2 to receive funds.

A decision on an application is made from a few minutes to half an hour. If the loan amount exceeds 30-50 thousand rubles, the application is reviewed manually, which affects the processing time. The speed of receipt of money depends on the chosen method of receipt - to an account, to a card, to an electronic wallet or in cash and on the loan amount. Money is transferred at any time of the day, as well as on holidays and weekends.

You can increase the loan term for a period of 1-30 days. In some cases, if there are compelling reasons, the loan is extended without overpayments. In other cases, an additional commission fee is paid for loan extension. The number of possible extensions must be clarified with the microfinance organization.

For the first time, you can borrow an amount from 1 thousand rubles to 30 thousand rubles, depending on different conditions. The size of the first loan is influenced by the borrower’s income, loan term, good credit history, and conditions for certain programs.

The MFO checks the validity of the passport through the FMS database, registration address, contact information of the borrower, assesses his solvency, and looks at open records in the FSSP database. Online client profiles are checked by an automated scoring system. Data from the BKI and bank card information are also checked.

A bad credit history is not a reason to expect a refusal. If the CI is damaged due to the fault of the creditor bank, you can contact the BCI with a statement. In other cases, you can try to correct it with a chain of small microloans taken sequentially and repaid in a timely manner.

If the loan is not given, you should find out the reason. For example, get your CI and study it to see if there are any delays caused by the banks. Maybe you have accumulated debt utility bills- it needs to be extinguished. After some time, you can re-apply to the microfinance organization to receive a smaller loan amount. Several consecutive small loans taken and repaid in a timely manner will improve your position in MFOs.

If the money is not returned to the MFO in due time, you will be charged penalties for a certain period stipulated in the agreement. If you do not contact and repay the loan during this time, your case will be referred to a collection agency, which will work with you to resolve how to return the money. If you avoid communicating with debt collectors, the case will be transferred to bailiffs who:

1. funds on the salary card will be seized;
2. travel abroad will be limited;
3. will seize your personal property.

Most often made of wood. This is understandable: this is the most accessible and “plastic” material that can play even in the hands of a beginner. The main thing is to approach it wisely. Get a tool and get some theoretical knowledge. And after a little effort on summer cottage There will be a place to relax in the fresh air.

Any homemade bench starts with a diagram. In the age of information, it is quite easy to find inspiration, but sometimes you have to look for the details for productive creativity. So, for a simple request “ drawings of garden benches made of wood“Google brings up a lot of photographs and diagrams, unfortunately, devoid of the details necessary to make these same benches yourself. And when looking for a bench layout, what really matters? Material, production process and, above all, dimensions.

So, choose based on preferences: product with backrest, straight or angled, wide or narrow, long or designed for only two people, dug in or installed on the ground. Next, the material is prepared. And you can start creating.

Drawings of garden benches made of wood

This is something that can be done in one day. The idea is not new, but the drawing is original. The bench, made with your own hands according to the scheme, has been successfully fulfilling its function for a whole season in the open air.

Main drawing

Bench base

First, the side posts of the bench are assembled according to the following schemes:

Keep in mind: any drawing, even the most detailed one, is still a diagram, a sketch from which you need to build. During production, parts will still have to be adjusted depending on the quality and quantity of materials, the availability of the necessary fasteners and decor options. This is a chance to give free rein to your imagination and make an exclusive thing.

Another drawing of a bench with a wooden back

Drawing of a bench with a back

General assembly plan

Assembling the legs

Drawings of garden benches with a wooden back

A wooden bench for a summer house will last longer if it is coated with a special impregnation. There are enough such compositions on sale. Some of them protect the wood more strongly, but change its shade. Others are able to protect against UV exposure and preserve the texture of the wood. Oil paints on wood perform the same functions, but cover the “wooden pattern”.

Among the small architectural forms The most common are benches and benches. Can be made from any materials or combinations thereof: wood, metal, stone, concrete, plastic, glass.

They are everywhere: streets and city squares, parks and squares, sports and educational establishments, public institutions and residential premises. Practically required element landscape design, plot of a private house or cottage.

The easiest material to process and affordable is wood. Do-it-yourself wooden benches provide an opportunity to save money, demonstrate your craftsmanship at home and be a creator.

Wooden benches: economy option

Make wooden benches using existing “blanks”. It is enough to process a little, collect a strong and functional design- with seat, back and legs.

Moreover, such “modules” are inexpensive, sometimes purchased for “pennies.” It's about about pallets or pallets.

But not everyone is suitable for arranging garden furniture. You should not use products made from off-grade or unedged boards. In the first case, large knots may fall out, in the second, the “aesthetic” qualities suffer.

There are cases where the board fastening step is clearly not suitable for a bench.

A pallet, as in the photo, would be better. With an angular chamfer removed along the contour.

The width of the pallet is large for bench seating. It needs to be trimmed, the remainder can be used to construct the backrest.

If the width of the backrest is not enough, then the bench will have to be made from two pallets.

The seats and backrest are part of the structure. Need legs. Let's make pallets from the board itself.

the bench may not be stable -

Rigidity is ensured by the seat, and the mounting area of ​​the legs is quite small. Usually a lower ligament is added so that they do not “spread apart”. A simpler option is to use another pallet (or rather part of it) as a base.

or two. Do-it-yourself benches and benches made of wood in detail and clearly.

Fixing the backrest, as can be seen from the examples, can be done using a pair of slats, a board, a rope or rope. The assembled bench, its surface is cleaned, sanded, varnished or painted.

You can not cut the pallets to width and make a garden sofa.

There are examples of using pallet boards to make benches and other products from the class of small architectural forms. Flowerpots are also taken in the photo.

It is not necessary to waste time disassembling pallets, but it is better to buy standard lumber.

Simple bench shapes: board and timber

There are designs and execution options - from the simplest to specimens with wood carvings, worthy of being called real works of applied art.

The easiest option for making is a wooden bench without a back.

The drawing shows a do-it-yourself wooden bench, made entirely of boards with a thickness of 75 mm.

Each element consists of two parts.

The seat with beveled ends is assembled from two boards. If the bench stands on open area or outside a heated room, it is better to provide a gap. It will allow water to drain and compensate for wood swelling.

The leg consists of two glued elements. For reliability end connection a pin (dowel) is inserted. Two short support beams and seat fastenings are attached to the leg. The legs and beams are connected with grooves, fixed with glue and self-tapping screws. Once assembled, the leg and beam are attached to the seat board with two pairs of screws and dowels, and holes are pre-drilled for them.

Benches assembly order:

1. Cut out the workpiece;

2. Process the ends and clean the surfaces for gluing;

3. Glue the legs together;

4. Beams are attached to them;

5. Assembling the shop;

6. Sanded and coated with varnish (or paint).

Images and drawings of a bench made of 30 mm boards with a support beam.

Already present here curly elements in the form of legs with radius cutouts. You can make the work easier and make them rectangular. The drawing is not a dogma - it can be taken as a basis and changed in the direction of simplification or in the direction of complexity. They do the same with sizes - make the bench wider, shorter, etc.

What is the difference between this option and the previous one?

One long support beam is used instead of four short ones; it also serves as a stiffening rib for the base - the legs and the entire structure are more stable. The connection between the legs and the beam goes through a tongue and groove, and the tenon is much easier to cut out. That is, this form is a little easier to manufacture, more stable and gives more possibilities for experimentation.

Below are several options for a similar design, but in a different design.

For example, in the minimalist style - there are not even protruding edges. Splicing according to the tongue-and-groove principle is used to connect the legs and the seat.

In this model, they simplified the task as much as possible - they even abandoned cutting out grooves and tenons. In this case, it is better to make the connection between the legs and the beam using confirmations rather than self-tapping screws (they have a larger contact area). For strength, they usually add a pair of dowels on each side, set with glue. Hidden mount the seats are made on a dowel, the open seats are made on a self-tapping screw.

If the bench is not very long, then the beam can be placed at the bottom. In this design, it serves solely as a stiffener.

In the photo below you can see an unusual case of using a dowel - it attaches the beam to the legs not with a hidden installation, but with an open one.

In this bench, a block was used to “help” the board.

Legs with crossbars and two oblique supports for sitting are made from it. All fastenings are made on confirmations, and the bars of the legs are connected to each other using grooves.

Here also a block is used for the base. Due to the large thickness of the seat board, it does not require additional support. The lower beam serves as a stiffener.

Making a small bench with a back is not much more difficult. The principle of installation and fastening is similar to simple benches: grooves, tenons, dowels, glue, screws and confirmations.

You can take a design with “solid” board legs as a basis. Move them a little from the center to the edge so that the ends of the seat and legs are in the same plane. Attach vertical beams to the legs and screw the backrest to them.

For a model whose base is made of a block, making the back is even easier. Two pairs of legs: front - for seat support, rear (high) - for fastening load-bearing beam, seats and backrests.

These were lightweight and “mobile” designs of benches and benches made of wood, which could be used with equal success in an open area, under a canopy or indoors. There are more massive forms aimed at “stationary” placement.

Benches: large format

Making a wooden bench with your own hands for a summer residence involves using any form of material. Including those that are used in the construction of wooden houses.

For example, timber. For reference: timber is classified as such if the aspect ratio is no more than 1:2, and the smaller side has a size of 100 mm or more. Reducing the size transfers such lumber to the “block” category.

It is not easy to assemble a bench like the one in this photo with your own hands, but it is possible.

Assembling the legs is not difficult at all. The only difference from a board and a block is that more powerful fasteners will be required. For example, such self-tapping bolts for wood.

You will have to widen the hole under their head (but confirmations also require this) and place a washer.

Installation and installation of the seat is much more difficult.

To “bundle” the timber together you need three metal studs, with a length almost the width of the seat, and two - the width of the bench, taking into account the legs. It’s difficult to find these on sale - you’ll have to make them from round reinforcement (stainless steel). The gap between the beams can be maintained using wooden plates from boards strung on studs. The thickness of the plates should be the same as the three supporting vertical beams that support the seat in the center of the bench.

And this specimen is made of even more powerful timber (150×100). Its assembly is much simpler. Two seat beams are attached from below through short cross beams, which are then mounted to the T-shaped legs.

Another easy-to-follow example using a large-format board. The load-bearing capacity of the material is such that the use of reinforcing beams is not required - the seat is attached to the ends of the short legs. The author of the project knows well that the toughest geometric figure- triangle. Therefore, both the configuration of the lower part of the supports and their connection with each other with bolts has the shape of an equilateral triangle.

If possible, order two non-standard wooden beams, then making such a bench with your own hands will not be difficult: you will need to “add” four short timbers (100×100) for the legs and two timbers (100×50) for the back.

But if this is not possible, then instead of a non-standard beam you can use a couple of standard ones.

Such garden bench He already uses logs from wood with his own hands.

The most difficult thing in this option is to use an ax (or adze) to make a longitudinal groove and tenon for connecting the logs. For reliable fixation you will need a couple more dowels on each side (this is the same dowel, but only thicker and longer). The seat and back can be made of boards (as in the photo) or timber. Do-it-yourself benches and benches made of wood - ideas and solutions.

And this version of the bench is already more complicated.

But not really. The main difficulty is making the back, or rather the notch on it. All fastenings of parts of the structure to each other are carried out using dowels.

In principle, such wooden fasteners are quite durable - log houses of a couple of floors (including wooden churches) were previously built without a single nail.

And a very simple option: two logs with a groove and half a log sawn lengthwise.

Wooden bench

In conclusion, here are a couple of examples of how you can make a bench from wood, not purchased wood, but found in a nearby planting or forest. Benches and benches made of wood with your own hands from auxiliary materials.

In this example, only the seat is made of boards, everything else is made of natural material, which had to be selected according to thickness and adjusted to size.

To make the seat of such a bench, you need professional tool, so you will have to either order longitudinal sawing of the log, or (which is easier) take it as a blank unedged board.

Information to note : , .

Most owners of country plots, be it a house or a dacha, want to know how garden plots are made, and this is not surprising. You now have the opportunity to familiarize yourself with several options, which include drawings and photos of wooden structures. Such furniture can be made portable or stationary, but if you do not use it during the cold season, then the second option is of no use to you.

Family relaxing on a garden bench

What types of garden benches are there?

Rocking bench for relaxation

First of all, let's understand the meaning of this word. In various dictionaries of the Russian language, it is defined as a device for sitting for several people and can be with or without a backrest. Synonyms include definitions such as bench bench, bench, furniture. But the bench is more considered as a low footrest. In our case, this is garden furniture, which has a backrest for support.

Such designs differ not only in size - they also differ in other parameters, such as:

1. product configuration – standard, non-standard;
2. armrests – in stock, out of stock;
3. design - with wood carvings or strict straight lines.

Gorgeous wood carved design

Few people can make furniture like the one in the photo above - it is not enough to be an ordinary carpenter or even a cabinet maker. This is the art of wood carving, which requires the mindset of an artist and, of course, practical skills. But every second person has the opportunity to make the simplest garden benches, if they have the tools and materials.

Materials for assembling a garden bench

Edged polished larch board

The main material for garden benches is wood, but it has absorbent properties, which is highly undesirable for outdoor products. Of course, to protect against street moisture, antiseptics such as “Anti-Rot”, Neomid, “Wood Doctor”, etc. are used, but it is better if the lumber itself is classified as moisture-resistant. Therefore, the highest quality garden furniture is made from oak and larch.

In addition, wood exposed to atmospheric conditions (rain, snow, fog, hail, frost, ice, UV radiation ( Sun rays), wind), coated with alkyd-urethane varnishes. You can use brands such as Rogneda Eurotex, Varagan Premium Spar Urethane, Dufa Retail, Tikkurila Unica Super, etc. Such compositions will not only protect the wood from atmospheric processes, but also from impacts and scratches - this is possible , thanks to the increased wear resistance of the coating. You can't expect such an effect from paints.

Stock up on the following materials:

• polished edged board 40-50 mm thick for a seat of any width;
• polished edged board 30-40 mm thick for backrest of any width;
• planed edged board 40×70 mm or 50×100 mm for assembling the frame;
• timber 100×100 mm for the frame (not always used);
• 70×70 mm block for frame and lintels;
• antiseptic (liquid preparation);
• paints and varnishes;
• metal fasteners: wood screws, bolts with nuts and washers, steel angles.

Note. In some cases, for the manufacture garden bench with their own hands, they can even use a log, spreading it lengthwise into two equal parts. Also among the lumber there may be pallets - these are excellent blanks for assembling simple furniture.

Requirements for the quality of lumber

Chamber method of wood drying

The moisture content of lumber plays an important role in determining the quality of products, and this is not without reason, because a structure assembled from a damp board will dry out in the future. Therefore, in order to choose the most suitable board(timber or timber), you should pay attention to the instructions of GOST 20850-84, where dry wood is considered to be a board with 12% moisture content, and the natural (street) state implies 15-20%.

Drying lumber naturally

In our case, both the first and second Gosstandart indicators are suitable, since such furniture is intended for use on outdoors. But it will be quite normal if you purchase very dry boards - there are no components here that can be critically affected by the swelling of the lumber when wet.

It is important to pay attention to the presence of stains on the boards: if there are black stains, this indicates that the wood is infected with fungal mold. But if you see blue spots, you can be sure that the drying was carried out without ventilation and the board was steamed. The presence of blackness and blueness indicates an irreparable defect and such products should not be purchased. Also check the boards for cracks and knots - there shouldn’t be any of them on high-quality workpieces.

Tools for assembling a garden bench

Minimum set carpentry tools

We live in times of rapid development technical progress, therefore, it is not necessary to use it for work minimum set carpentry tools. That is, the purpose may remain the same, but the functionality and processing speed will certainly increase significantly!

What will be useful carpentry tools:

• manual (stationary) a circular saw and/or electric jigsaw;
• electric drill and/or screwdriver;
• a set of drills, bits and core cutters for wood;
• hand router with a set of cutters (not always needed);
• disc or belt sander (not always needed);
• chainsaw (for large workpieces such as timber or logs);
• metalworker's wrenches (socket, socket, open-end);
• an ax for working with logs;
• tape measure, construction corner, level, pencil, paint brush.

Some options for making wooden benches

To make a garden bench with your own hands, of course, you will need drawings and photos ready-made structures so you can imagine the end result. All of the furniture examples below are assembled from wood with a small amount of metal fasteners.

There are average dimensions of such products, therefore, in order to create conditions for comfortable rest, you should adhere to the following indicators:

1. bench seat height – 400-500 mm;
2. bench seat width – 500-550 mm;
3. bench and back length – 1000-1900 mm;
4. back height – 350-500 mm;
5. The width of the back is at your discretion.

Option No. 1 - a simple bench made of boards

Dimensional drawings

Sketch with names of parts: 1) front legs, 2) rear legs, 3) longitudinal drawers, 4) side drawers, 5) boards for the back and seat, 6) furniture dowel 80 mm long, 7) furniture dowel 40 mm long, 8 ) stiffness gussets

At this stage after selection necessary materials and tools, you need to measure each workpiece to make sure that its dimensions are sufficient for the manufacture of a particular part. You probably understand that under constant loads, transverse joining of parts is extremely undesirable and even unsafe for a person under whom such furniture will break.

Joints of main lumber are possible only at the seat, if there is a central pair of legs there. For example, the bench will have 1990 mm and this length can be obtained by connecting two boards on the jumper of the central pair of legs. But for such an operation it is necessary that both fragments of the board be of the same thickness and width, then, perhaps, the joining seam, if properly processed, will not even be noticeable.

Now you need to cut all the parts from the blanks according to the dimensions indicated in the drawing, or according to your own parameters, since your dacha area may have other needs. All connections are made using dowels, self-tapping screws and bolts with nuts and washers (dowels, by the way, can also be replaced with self-tapping screws). But when choosing fasteners, you need to take into account the possible load on the bench. If children will use it, then the nodes can be fixed with self-tapping screws and/or nails, but for a more serious load it is better to use bolts with nuts and washers.

The assembly should begin with the frame, or rather with the legs, of which there will be two or three pairs, depending on the length of the bench, and if it is designed for two people (meter-long), then the third pair is not needed. I would like to draw your attention to the rigidity of the legs.

Usually it's two vertical boards or two beams - one to the top of the back, and the other to the bottom of the bench. There are also two jumpers: the lower one connects the posts in the middle of the short riser, and the upper one forms the basis for fastening the boards to the seat. To ensure that such an assembly never becomes loose, gussets should be screwed under the lower and/or upper jumper - these are triangles from the same profile from which the frame is made.

All components are marked in the order in which they were assembled

Step-by-step instruction to assemble all the components (check the picture):

• Frame molding. Two vertical racks(No. 1 and No. 2) are connected by transverse jumpers (No. 7).
• Increased rigidity. After this, another pair of legs is assembled in the same way (or two more pairs, if the bench is designed for three points of support), strengthened and connected. To do this, additional transverse jumpers are used (No. 4 and No. 5), and all pairs are connected to each other by a longitudinal bar or board (No. 6).
• Installation of seat and backrest. This operation will require polished bars or boards - they are fixed to the structure frame (No. 3).

Moisture protection

Treating wood with antiseptics and varnishes

If you want the bench on your site to last for many years, it needs to be treated with antiseptics and/or alkyd-urethane varnishes, which were mentioned in the section “Materials for assembling a garden bench.”

Video: Assembling a very simple bench with a backrest with your own hands

Option No. 2 – bench with a back made of logs

Thick boards and logs were used for production.

Today, people are increasingly looking back to the past and, in connection with this, styles such as Russian and English or French are in demand in the interior. All this can be combined under a common name in the group “ country style" You can look at successful homemade products; photos of making garden benches from logs with your own hands are located at the top and bottom of this paragraph.

Log bench with log table

But how to make a bench so that it matches this design, because the interior has nothing to do with it - it’s the exterior. However, it is possible to adhere to this direction even on personal plot, especially since in unity with nature it should turn out very attractive. IN in this case You can use not only logs, but also unedged boards, you just need to first get rid of the wane.

But it is advisable to start from the base, that is, you should build an improvised one on the ground, since you are unlikely to be able to put such a bench indoors or under a canopy at the end of the summer season - it is too bulky and heavy. As a foundation, you can make shallow holes of 7-10 cm, pour a 5-8 cm layer of sand into it, compact it, and cover it with bricks on top (length 50-51 cm, for two bricks). The standard length or solid brick is 250 mm, width -120 mm, thickness -65 mm. This is quite enough to raise the structure a few centimeters above the ground, saving it from water, and no concrete is needed.

Drawing of a very simple, but very beautiful bench made of logs

Pay attention to the drawing located at the top - you see that the length of the bench is two and a half meters and can comfortably accommodate 5-6 people. Of course, for a 50 mm board this is too much load, but for half a log, where the radius is 100-150 mm, it is not at all difficult to withstand such a weight.

On the left is a scrap for the base, on the right is half a log for a bench

The legs, in the literal sense of the word, do not have to be assembled and installed here - their function will be performed by two blocks of wood installed on bricks (foundation) in a horizontal position. To prevent such stands from rolling, you need to make the bottom flat, as shown in the drawing above, by cutting off part of the log with a chainsaw. In this case, you will need to calculate these stands so that they lie strictly horizontally and are at the same level with each other. Grooves are made on the blank for the bench, into which the rounded stands will then sit - this is also shown in the drawing.

Note. If you do not find thick enough logs to make the final seat height 40-50 cm, then you can attach thinner ones to the supports from thick logs. In the end, it may turn out even more attractive.

Now let's talk about the back - it can be straight or inclined, it all depends on how you install the thrust profiles - strictly vertically or at an angle. In the first case, two round timber ø80-100 mm will be suitable as thrust profiles - they will need to be screwed to horizontally lying logs that serve as legs and to half of the log, that is, to the seat. To create structural rigidity, the lower parts of these racks are cut lengthwise to the height of the bench. For fixation, it is best to use not ordinary long self-tapping screws, but anchor bolts For example, for an anchor with a cross-section of 10 mm, mounting holes of ø6 mm are drilled, or for a cross-section of 12-14 mm, a hole with a diameter of 8-10 mm will be needed.

For an inclined back, a 40×70 or 50×100 mm board or ø100-120 mm round timber is used as racks. If it is still round timber, then in the places where it joins the supports (legs) and the bench you need to make cuts to create a plane for rigidity. But when using a 40x70 mm board, you can even use a router to select grooves in horizontally lying logs in order to hammer these stops into them. The groove must be coated with wood glue or PVA, and the board must be screwed to the bench.

The backrest, both on strictly vertical and inclined stops, is fixed according to the same principle as the seat - seating grooves are selected in half of the log, and, having coated them with glue, they are screwed on with self-tapping screws. Upon completion of assembly, the structure is treated with an antiseptic and/or water-repellent paint and varnish materials type alkyd-urethane varnishes. Below is a video where the master tells how he made a bench from logs.

Video: Garden bench made of logs

Option No. 3 – semicircular bench in the garden

Semicircular bench in the garden

You may think that this complex design and her independent construction you can't do it, but that's only at first glance. It is noteworthy that in this case, for such a design you will need a fairly uniform material, this is a board 40x70 mm, 50x100 mm and timber 100x100 mm. And, of course, fastening materials.

Assembling a semicircular frame for the seat

The top photo shows how the frame is assembled and it is very simple: first, cut five pieces of boards of the same length, for example, one meter long. Then, from four pieces, assemble two small meter-long frames using jumpers 40-45 cm long (three jumpers for each frame). Then another frame will have to be assembled between them in the middle, joining the side boards at an angle. Here it is advisable to use a 50×100 mm board, and fasten it with self-tapping screws.

In total you will need 4 pairs of legs (8 pieces)

If we take into account that the generally accepted height of a bench installed in the garden is about 40-50 cm, then for the legs you will have to cut eight fragments of timber 400-450 mm long.

The legs are screwed to the frame with self-tapping screws

The legs are screwed to the frame with self-tapping screws, but in order for the beam in the upper part to be flush with the frame, a board is placed for leveling, as shown in the photo.

When all the legs are screwed on, proceed to installing the seat.

When all the legs are screwed on, the frame is turned over to its normal position and the seat installation begins. Please note that the sheathing begins from the outer edge of the middle frame in order to set the direction of the 40x70 mm boards. To avoid fiddling around for a long time, you can screw several boards at once and cut off the excess with a circular saw right at the installation site. But you can also put a mark on each board by drawing a pencil from below. It is advisable to leave a small blockage between the boards - it will be more beautiful.

Supports under the backrest are attached to the legs and frame

Attaching the backrest to the supports

The supports for the backrest are first attached to the legs (to the side of the beam), and then to the frame using reinforced steel corners. When all the inclined stops are set, one or two 40x70 mm boards are screwed to them along the top as a backrest. Upon completion of assembly, the structure is treated with an antiseptic and/or paints and varnishes.

Option No. 4 – garden bench with a back made from old pallets

Corner garden bench made from old pallets

Straight garden bench made from old pallets

I think that in order to get such a garden bench with a back, no drawings are needed. Here the usual block assembly takes place using self-tapping screws, where the size of the structure depends on the geometric parameters of the block.

Standard pallet 1000×1200 mm

There are two types of our pallets (produced in countries former USSR) and European. Our standard perimeter is 1000×1200 mm, and for Euro pallets it is 800×1200 mm. But those experts who have been making furniture from such materials for a long time recommend European stands, since the boards on them are planed, therefore, less time is spent on polishing.

Soft garden corner made from old pallets

You can even arrange a rest in the garden on soft benches; for this, the structure is temporarily covered with pillows, which can always be removed in case of bad weather.

Wood processing in this case is no different from other options, that is, it is coated with an antiseptic and/or paints and varnishes.

Video: Making a garden bench from old pallets

Conclusion

If you want, you can choose one of four options for making a garden bench with a back, made by yourself. You can also use the drawings given in the article, but if necessary, change the dimensions in accordance with specific needs, that is, focusing on the conditions of the site.